Fully Automatic 300~1500 Cbm Per Day MDF/HDF Continuous Press
Production Line
hot press is mainly used to produce two sides decorated board.
suitable for laminating melamine paper,wearable paper and balance
paper in both sides of HDF board to produce laminate flooring.
1. Aging treatment: The steel used in our lamination machine was
after aging treatment, that's make our material more uniform
stress.
2. Frame mechanism: The closed frame is strengthened, which will
ensure its working accuracy by appropriate design, reinforced
mechanical properties and machining each surface.
3. Oil cylinder adopts the advanced sealing technology, cast-steel
cylinder body, chill-iron plunger and good machining accuracy,
all of which will extend the working life of cylinder.
4. Adopt PLC control and touch screen. easily set the time and
pressure.
Description
The 300~1500m³/day MDF/HDF production line uses raw material
through chips preparation, fiber manufacturing, glue dosing system,
forming and hot pressing, cooling &trimming and sanding section
to make MDF/HDF board. The final size can be 4 x 8, 6 x 8, 6 x 9, 4
x 12, 6 x 12, 6 x 18. The MDF/HDF board has homogeneous structure,
smooth surface, good machining specification and manufacture
performance. It is the ideal substitute of nature wood.
Summary of process flow
- Chips Preparation Section
- Fiber Preparation Section
- Glue Dosing System
- Drying Section
- Forming Line
- Continuous Press System
- Master Board Handling System
- Automatic Storage System
- Sanding and Cut-to-size Section
- Surface Grading System
- Automatic Package Section
Main technical data
| Item | Unit | Specification |
| Capacity | m³/d | 300~1500 |
| Width of production line | feet | 4,6,7,8,9 |
| Final board thickness | mm | 1~40 |
| Final board width | mm | 915~2800 |
| Final board length | mm | 1830~5490 |
| Press speed | mm/s | Max. 2500 |
Key equipment of production line
- Sanding and cut-to-size line
