Cone tube, thick wall cone tube, rolled tube, stainless steel cone
tube processing and production of large and small head cone tubes
PRODUCT DETELS
Cone Tube:
A cone tube refers to a tube or pipe that has a conical shape. It
tapers from a larger diameter at one end to a smaller diameter at
the other end, resembling the shape of a cone.
Thick Wall Cone Tube:
A thick wall cone tube refers to a cone tube with a relatively
thick wall thickness. The increased wall thickness provides added
strength and durability to the cone tube, making it suitable for
applications requiring higher pressure or structural integrity.
Rolled Tube:
A rolled tube refers to a tube or pipe that is formed by rolling a
flat sheet of metal into a cylindrical shape and welding or joining
the edges together. This process is commonly used to manufacture
seamless tubes or pipes.
Stainless Steel Cone Tube Processing and Production:
The processing and production of stainless steel cone tubes involve
several steps:
- Material selection: Choose the appropriate grade of stainless
steel, such as 304 or 316, based on the application requirements.
- Cutting: Cut the stainless steel sheet into the desired size and
shape for the cone tube.
- Rolling: Form the cone shape by rolling the flat stainless steel
sheet and welding the seam to create a continuous tube.
- Welding: Join the edges of the rolled stainless steel sheet using
welding techniques to ensure a strong and secure connection.
- Finishing: Perform any required finishing processes, such as
polishing or surface treatment, to improve the appearance and
corrosion resistance of the cone tube.
Large and Small Head Cone Tubes:
Large and small head cone tubes refer to cone-shaped tubes or pipes
with different sizes of heads (ends). The term "large head"
typically indicates a cone tube with a larger diameter head, while
"small head" indicates a cone tube with a smaller diameter head.
These variations in head size can be customized based on specific
application requirements.
When manufacturing cone tubes, it is important to consider factors
such as material selection, wall thickness, dimensional accuracy,
pressure ratings, and compliance with relevant industry standards.
Consulting with experienced engineers or manufacturers specializing
in cone tube production can help ensure the proper design,
processing, and production of large and small head cone tubes for
your specific application.
Order information:
- Pls provide us with below information
- Material grade. Including special requirement if have
- Head Diameter
- Nom THK or min thick
- Straight Flange if have
- others special forming process
The scope of products
Applicable to various building decoration industries
Widely used in electric power, metallurgy, food, pharmaceutical,
petrochemical, water treatment equipment and light industry
equipment. The company can also undertake the processing of
incoming drawings and samples according to customer requirements,
and customize products of different specifications.
production workshop
equipment Exhibition
A corner of the warehouse
One-stop ordering of head products
Non-standard customization In stock for two days Customized for seven days
SPECIFICATIONS
| Brand Name: | HaiQun |
| Diameter: | 89mm--10000mm |
| Thickness: | 2mm--300mm |
| Reduction Ratio: | about 10% |
| Material: | Carbon Steel, Stainless Steel, Duplex, Super Duplex, Aluminum,
Nickel and Nickel Alloys, Copper and Copper Alloys, Titanium and
Its Alloys, Zirconium and all cladded material combinations. |
| Forming method: | Hot forming,cold forming |
| Surface Treatment: | Sand Blasting,Pickling,oil,discaling |
| Inspection: | UT,RT,MT,PT,TOFD. |
| Applicable Standard: | ASME ,PED and GB |
| Certificate: | ISO9001,ISO45001,OHSAS18001 |
| Applications: | Such as oil, chemical industry, water conservancy, electric power,
boiler, machinery, metallurgy, sanitary construction etc. |
| Package: | Wooden cases ,wooden pallet,Steel pallet or as per customers
requirement |
| Customized Product: | Available |
| Material | Carbon Steel; Stainless Steel; Special Steel |
| Size | 50-10000mm |
| Thickness | 2mm--300mm |
| Surface Treatment | 1. Intermediate & Final stage Heat Treatments;
2. Sand / Shot Blasting after Heat Treatment;
3. Weld Edge Preparation (Manual & Machined) |
| Reduction ratio | About 10% |
| Certificate | ISO9001 |
| Technology | 1. Cold & Hot forming;
2. Hot Pressed Hemispheres and Cold Formed Segmental Hemispheres; |
| Applicable standard | ANSI, ASME, MSS, API, DIN, JIS, BS. AWWA |
| Test | 1. Liquid Penetrant Examination;
2. Ultrasonic Testing;
3. 100% Radiography Testing of weld seams;
4. Magnet Particle Examination;
5. Inspection under various Third party Inspection Agencies
6. NDT( after forming): DPT, RT, MPI, UT;
7. NDT: 100% DPT, UT & RT OF weld joint |
| Connection | Welding |
| Application | Pressure vessel |
PRODUCTS
FAQ
Q: Why choose us?
A: Our company has been in the header manufacturing business for
more than thirty years. We have rich international experience and
professionalism, and we can provide customers with a variety of
high-quality header products.
Q: Can we provide OEM/ODM service?
A: Yes.Please feel free to contact us for further details.
Q: What are your terms of payment?
A: One is to telegraphic transfer 30% of the deposit before
production the remaining 70% to the copy of the bill of lading;The
other is an irrevocable 100% sight L/C
Q: Can we visit your factory?
A: A warm welcome.Once we have your itinerary we will arrange for a
professional sales team to follow up your case.
Q: Can you provide samples?
A: Yes,the sample of general size is free of charge,but the buyer
needs to pay the shipping fee.
