Car Gear Shifter Shaft Change Lever Parts For Motor Transmission Great Wall Motor Gear

Car Gear Shifter Shaft Change Lever Parts For motor Transmission

Here are the key roles and functions of the car gear shifter shaft:

• Gear Selection: The gear shifter shaft allows the driver to select different gears, such as park (P), reverse (R), neutral (N), drive (D), and various manual gears in a manual transmission. By moving the gear shifter lever, the driver actuates the gear shifter shaft, which, in turn, engages the corresponding gear within the transmission.
• Mechanical Connection: The gear shifter shaft physically connects the gear shifter lever inside the vehicle cabin to the transmission assembly. It transmits the driver's input through a series of linkages, cables, or electronic sensors, depending on the transmission type.
• Gate Selection: The gear shifter shaft might have a gate mechanism that guides the movement of the gear shifter lever, ensuring that the driver can only select specific gears within a predefined pattern. This gate mechanism prevents accidental gear engagement and enhances the overall shifting precision.
• Position Sensing: In some vehicles, the gear shifter shaft incorporates position sensors or switches to provide feedback to the vehicle's control systems. These sensors detect the selected gear position and relay the information to the engine control unit (ECU) or the transmission control module (TCM) for various functions like engine RPM management, traction control, or gear display on the instrument panel.
• Safety Interlocks: The gear shifter shaft might incorporate safety interlock mechanisms to prevent certain gear selections under specific conditions. For example, in many vehicles, the gear shifter shaft is designed to prevent shifting into reverse (R) without engaging the brake pedal, ensuring safety and preventing accidental vehicle movement.

To maintain the gears in Great Wall Motors (GWM) vehicles, you can follow these general guidelines:

• Regular Inspections: Periodically inspect the gears for any signs of wear, damage, or misalignment. Look for chipped or worn teeth, abnormal noise, or excessive backlash. The frequency of inspections may vary depending on the vehicle usage and manufacturer recommendations.
• Lubrication: Ensure that the gears are properly lubricated as per GWM's recommendations. Lubrication helps reduce friction, wear, and noise. Follow the manufacturer's guidelines regarding the type of lubricant to use and the recommended intervals for lubrication maintenance.
• Gearbox Maintenance: If your vehicle has a gearbox, follow the manufacturer's guidelines for maintenance. This may include regular fluid changes, filter replacements, and inspections for leaks or other issues.
• Proper Usage: Drive your vehicle with care and avoid harsh or abrupt gear shifts, especially during acceleration or deceleration. Smooth and proper gear engagement will help extend the life of the gears.
• Avoid Overloading: Don't exceed the recommended load capacity for your vehicle. Overloading can put excessive stress on the gears, leading to premature wear or failure.
• Address Issues Promptly: If you notice any abnormal noise, vibrations, or gear-related issues, have them addressed by a qualified mechanic as soon as possible. I gnoring such issues can lead to further damage and more costly repairs.

Our company was formerly known as Changsha Double Star Gear Industrial Co., Ltd, which was established in 1994. It is a directly affiliated university-run enterprise founded by Central South University Professor Zeng Tao, the leading expert on spiral bevel gears in China. It was later renamed as Changsha Senjie Gear Co., Ltd (abbreviated as "CSG") in 2016. CSG is a production R&D base specializing in professional design, reserch, manufacture and sales of high-quality small module spiral bevel gears and high reduction hypoid gears and cylindrical gears. In 2023, Hunan Dinghan New Material Technology Co., Ltd. was established as a specialized international export business department. CSG has strong scientific research and development capabilities and is also equipped a full set of advanced equipment including seven-axis five-linkage CNC spiral bevel gear grinding machines and gear milling machines. By making the best use of the scientific and technological achievements and equipment of the Gear Research Institute of Central South University, machanical processing, heat treatment and testing. We have developed high-quality products featuring high reduction, high speed, heavy load, low noise and less teeth for users.

With the quality policy of "scientific and technological innovation, quality first, being first-class firm and customer‘s satisfaction", we have won the trust of well-known domestic and abroad enterprises with stable and excellent quality. It is committed to be a pioneer of the industry of China's small-module spiral bevel gears, and is dedicated to providing service for any related industry requiring industrial robots, CNC turning and milling compound power tool turrets, industrial sewing machines, reducers, bicycles, power tools and aeromodelling. We sincerely look forward to your cooperation!