19/33KV AL RHZ1/RHV single core power cable 1x240mm2 MV xlpe
insulated power cable IEC60502-1
APPLICATIONS:
19/33KV AL RHZ1/RHV single core power cable 1x240mm2 MV xlpe
insulated power cable IEC60502-1 are suitable for laying in ground,
in trench or in ducts, in water, free in air or indoors
STANDARD:
GB/T12706.2, equivalent to IEC60502.2. Or BS, DIN, ICEA standard as
customer request.
Noted:Single Core Cables to BS 6622/BS 7835/IEC 60502/VDE 0276
Cable Construction
medium voltage cables are manufactured using the monosil process.
We provide the highly specialized plant, state-of-the-art research
facilities and meticulous quality control procedures that are
required for the manufacturing of PVC insulated cables for use up
to 6KV and XLPE/EPR insulated cables for use at voltages up to 35
KV. The materials are all kept in cleanliness-controlled conditions
throughout the production process in order to ensure the absolute
homogeneity of the finished insulation materials.
Conductors
Either aluminium or copper conductors are used. Conductors up to
630mm² will be circular, compacted & stranded and shall comply with
IEC 60228 class 2. 630mm² conductor will be circular stranded type
on which a layer of semi-conducting tape will be applied.
Conductor Screen
This will be an extruded layer of semi-conducting crosslinkable
compound applied under simultaneous triple extrusion process over
the conductor along with the insulation and the insulation screen.
The triple extrusion is a single high precision operation that
eliminates the possibility of any contamination between the layers
which could create irregularities in the electrical field. By
careful material selection and special attention to process
parameters, we produce the insulation screen layers with the
required degree of stripping force as stipulated by the applicable
national or international standard.
Insulation
This will be an extruded layer of XLPE applied over conductor
screen under triple extrusion process along with conductor screen
and insulation screen.
Insulation Screen
This will be a layer of semi-conducting crosslinkable compound
which will be applied by triple extrusion process over the
insulation.
Metallic Screen
It will consist of a layer of copper tape applied helically with
overlap over insulation screen. Other combinations of metallic
screens as per customer ’s requirement can also be provided on
request.
Laying-Up
In case of three core cables, the three cores are laid up with
non-hygroscopic fillers like polypropylene(PP) fillers at
interstices and a binder tape is applied with an overlap. These
binder tapes can be of PVC or foamed Polyethylene.
Over Sheath
An extruded layer is applied over the armour in case of armoured
cables and over laid up cores in case of unarmoured cables. Outer
sheath material can be either PVC, PE, HDPE or MDPE. our
medium voltage cables are normally supplied with red PVC over
sheaths complying with BS 6622 or IEC 60502. Other colors may be
provided to suit a range of installation considerations such as the
effect of UV radiations and differing soil compositions.
Anti-termite formulations can also be supplied in addition to
graphite-coated over sheaths where on-site testing of the sheath is
required.
Fire Performance on Cable Sheaths
Cables can also be supplied with special flame retardant PVC over
sheaths to comply with the IEC 60332 standard. We can also supply
cables with Low Smoke Halogen Free (LSZH) sheaths according to BS
7211 and BS 6724 standards or other equivalent international
standards.
Operating characteristics
Rated power-frepuency voltage U0/U: 3.6/6kv~26/35kv.
Max.admissible operating temperature of the conductor:90ºC.
Max. short-circurt temperature of conductor shall not exceed 2500C.
(5s maximum duration)
The bending radius of a single-core cable should not less than 20
times of the cable diameter.
The bending radius of a multi-core cable should not less than 15
times of the cable diameter.
19/33KV AL RHZ1/RHV single core power cable 1x240mm2 MV xlpe
insulated power cable IEC60502-1 Parameters:
| Nom. Cross- Section Area | Nom. Insulation Thickness | Metallic Screen Area | Nom.Bedding Thickness | Nom. Armour Wire Diameter | Nom. Sheath Thickness | Approx. Overall Diameter | Approx. Weight |
| mm² | mm | mm² | mm | mm | mm | mm | |
| 185 | 8 | 25 | 1.3 | 2.5 | 2.5 | 49.6 | 3010 |
19/33KV AL RHZ1/RHV single core power cable 1x240mm2 MV xlpe
insulated power cable IEC60502-1 images
Why Choose Zhenglan Cable:
- OEM/ODM services provided;
- Products comply with GB, IEC, BS, ASTM, DIN, VDE and JIS standards;
Customer standard requirments Accepted;
- Certified to ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007;
- Registered capital of $30 million and factory covers an area of
60,000㎡;
- Advanced test equipment and procedures, 100% inspection before
factory;
- Enough stocks and the higest efficient shipping time guarranteed;
- Professional pre-sales and after-sales services provided
