0.6/1kv xlpe insulated PVC-st2 sheathed 90℃ low voltage power cable
AAC/XLPE/PVC IEC60502-1, IEC60332-1
Applications:
0.6/1kv xlpe insulated PVC-st2 sheathed 90℃ low voltage power cable
AAC/XLPE/PVC IEC60502-1, IEC60332-1 cables is applicable for AC 50Hz transmission and distribution lines with
rated voltage of 1.8/3KV or below. The mechanical properties and
electrical performance of cables meet the requirements of national
standard GB/T12706- 2008 and international standards IEC60502-2005.
Operating characteristics
1. Cable laying temperature: ≥0°C
2. Cable conductor long-term allowable working temperature:≤90°C
3. Higest working temperature of cable in case of short circuit
(the longest lasting time is not over 5s): 250°C
4. Minimum allowable bending radius: Single core cable: 20D mm;
multi-core cable: 15D mm Note: D is actual outer diameter of the
cable
Construction:
Conductors:Copper or Aluminium conductor, round standed or Shaped,
Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid round
conductor, Class 1 as per IEC 60228, BS EN 60228 can also be
supplied upon request.
Noted: Insulation color as per standards or customer requirement.
Standard:
Basic design to IEC 60502-1, IEC 60228,BS EN 60228
China: GB/T 12706.2-2008
Other standards such as BS7870,DIN and ICEA upon request
Certificates:
CE, ROHS,KEMA and more others at request
Insulation:
XLPE material and thickness shall be as per IEC 60502 or BS 5467
rated for 90°C continuous operation.
Colour Code:
| Colour Code (1) : | |
| 1 Core | Red or Black |
| 2 Cores | Red, Black |
| 3 Cores | Red, Yellow, Blue |
| 4 Cores | Red, Yellow, Blue, Black |
| 5 Cores | Red, Yellow, Blue, Black, Green |
Outer Sheath: Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1
or Type 9 as BS 6346/5467.Special type of PVC sheathing material
such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC,
Sunlight resistant PVC, Oil Resistant PVC are available on special
request. Also, special sheathing materials such as LLDPE, MDPE,
HDPE, LSF, CPE are available on request.
Fire Performance of Cable Sheaths: Cables can be supplied with special flame retardant PVC outer
sheath to comply with the flame test requirements of IEC
60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, can also supply
cables with Low Smoke Halogen Free (LSHF) material according to IEC
60502-1, BS 7211, BS 6724 or other equivalent standards.
0.6/1kv xlpe insulated PVC-st2 sheathed 90℃ low voltage power cable
AAC/XLPE/PVC IEC60502-1, IEC60332-1 Cable Parameters:
Nominal Cross Section | Diameter of Conductor (Approx.) | Nominal Insulation Thickness | Nominal PVC Sheath Thickness | Overall Diameter (Approx.) | Weight of Cable (Approx.) |
| mm² | mm | mm | mm | mm | Kg/Km |
| 1x1.5 | 1.6 | 0.7 | 1.4 | 6.0 | 50 |
| 1x2.5 | 2.0 | 0.7 | 1.4 | 6.5 | 70 |
| 1x4 | 2.25 | 0.7 | 1.4 | 7.0 | 80 |
| 1x6 | 2.76 | 0.7 | 1.4 | 7.5 | 110 |
| 1x10 | 4.0 | 0.7 | 1.4 | 8.5 | 150 |
| 1x16 | 5.0 | 0.7 | 1.4 | 9.5 | 215 |
| 1x25 | 6.3 | 0.9 | 1.4 | 11.5 | 315 |
| 1x35 | 7.4 | 0.9 | 1.4 | 12.0 | 415 |
| 1x50 | 8.8 | 1.0 | 1.4 | 13.0 | 555 |
| 1x70 | 10.6 | 1.1 | 1.4 | 15.0 | 760 |
| 1x95 | 12.4 | 1.1 | 1.5 | 17.0 | 1025 |
| 1x120 | 14.0 | 1.2 | 1.5 | 18.5 | 1270 |
| 1x150 | 15 .5 | 1.4 | 1.6 | 21.5 | 1575 |
| 1x185 | 17.4 | 1.6 | 1.6 | 23.0 | 1955 |
| 1x240 | 20.3 | 1.7 | 1.7 | 26.0 | 2470 |
| 1x300 | 22.7 | 1.8 | 1.8 | 28.0 | 3155 |
| 1x400 | 25.4 | 2.0 | 1.9 | 32.0 | 4049 |
| 1x500 | 28.8 | 2.2 | 2.0 | 36.0 | 5100 |
| 1x630 | 30.4 | 2.4 | 2.2 | 40.0 | 6410 |
| 1x800 | - | 2.6 | 2.3 | 47.0 | 8200 |
| 1x1000 | - | 2.8 | 2.4 | 52.0 | 10210 |
0.6/1kv xlpe insulated PVC-st2 sheathed 90℃ low voltage power cable
AAC/XLPE/PVC IEC60502-1, IEC60332-1 Productos show:
Why Choose Us:
Zhenglan Cable Technology CO., Ltd.,formerly known as HENAN
Zhengzhou Cable Co., Ltd., is one of the large scale backbone
enterprises in China's wire and cable industry. The factory is
located in the Zhengzhou cable science and Technology Industrial
Park of the Wuzhi industrial area. It is a modern industrial park
integrating advanced research and development technology and
production technology.
- OEM/ODM services provided;
- Products comply with GB, IEC, BS, ASTM, DIN, VDE and JIS standards;
Customer standard requirments Accepted;
- Certified to ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007;
- Registered capital of $30 million and factory covers an area of
60,000㎡;
- Advanced test equipment and procedures, 100% inspection before
factory;
- Enough stocks and the higest efficient shipping time guarranteed;
- Professional pre-sales and after-sales services provided.
