0.6/1kv RV aluminum cable AL/XLPE/PVC cable 1Cx240sqmm
Construction:
Conductors: Copper , round standed or Shaped, Class 2 to IEC 60228,
BS EN 60228.
Noted: Insulation color as per standards or customer requirement.
Application:
These cables are used for electricity supply in low voltage
installation system. They are suitable for installation in indoors
and outdoors, in cable ducts, in power and switching stations,
local energy distributions, industrial plants, where there is have
many movings.
Standard:
Basic design to IEC 60502-1, IEC 60228,BS EN 60228
China: GB/T 12706.2-2008
Other standards such as BS7870,DIN and ICEA upon request
Insulation:
XLPE Insulation material and thickness shall be as per IEC 60502-1
and BS 6346. PVC material shall be Type A as per IEC 60502-1 or TI1
as per BS EN 50363.PVC Insulation material as per SASO 1694 rated
for 85°C continuous operation is also available upon special
request.
Colour Code Colour Code:
1 Core: Red or Black;
2 Cores: Red, Black;
3 Cores: Red, Yellow, Blue;
4 Cores: Red, Yellow, Blue, Black;
5 Cores: Red, Yellow, Blue, Black, Green;
Above 5 Cores: Black Cores with White numerals
Outer Sheath: Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1
or Type 9 as BS 6346/5467.Special type of PVC sheathing material
such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC,
Sunlight resistant PVC, Oil Resistant PVC are available on special
request. Also, special sheathing materials such as LLDPE, MDPE,
HDPE, LSF, CPE are available on request.
Fire Performance of Cable Sheaths: Cables can be supplied with special flame retardant PVC outer
sheath to comply with the flame test requirements of IEC
60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, can also supply
cables with Low Smoke Halogen Free (LSHF) material according to IEC
60502-1, BS 7211, BS 6724 or other equivalent standards.
0.6/1kv RV aluminum cable AL/XLPE/PVC cable 1Cx240sqmm Parameters:
Single core(unarmoured)
Nominal Cross Section | Diameter of Conductor (Approx.) | Nominal Insulation Thickness | Nominal PVC Sheath Thickness | Overall Diameter (Approx.) | Weight of Cable (Approx.) |
| mm² | mm | mm | mm | mm | Kg/Km |
| 1x4 | 2.25 | 1.0 | 1.4 | 7.5 | 95 |
| 1x6 | 2.76 | 1.0 | 1.4 | 8.0 | 120 |
| 1x10 | 4.0 | 1.0 | 1.4 | 9.0 | 165 |
| 1x16 | 5.0 | 1.0 | 1.4 | 10.0 | 230 |
| 1x25 | 6.3 | 1.2 | 1.4 | 12.0 | 340 |
| 1x35 | 7.4 | 1.2 | 1.4 | 13.0 | 450 |
| 1x50 | 8.8 | 1.4 | 1.4 | 14.5 | 570 |
| 1x70 | 10.6 | 1.4 | 1.4 | 16.0 | 800 |
| 1x95 | 12.4 | 1.6 | 1.5 | 18.5 | 1070 |
| 1x120 | 14.0 | 1.6 | 1.5 | 20.0 | 1200 |
| 1x150 | 15.5 | 1.8 | 1.6 | 22.0 | 1600 |
| 1x185 | 17.4 | 2.0 | 1.7 | 24.0 | 1980 |
| 1x240 | 20.3 | 2.2 | 1.7 | 27.0 | 2560 |
| 1x300 | 22.7 | 2.4 | 1.8 | 30.0 | 3180 |
| 1x400 | 25.4 | 2.6 | 1.9 | 33.0 | 4060 |
| 1x500 | 28.8 | 2.8 | 2.0 | 37.0 | 5140 |
| 1x630 | 30.4 | 2.8 | 2.2 | 42.0 | 6600 |
Test equipment
Why Choose Zhenglan Cable:
- OEM/ODM services provided;
- Products comply with GB, IEC, BS, ASTM, DIN, VDE and JIS standards;
Customer standard requirments Accepted;
- Certified to ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007;
- Registered capital of $30 million and factory covers an area of
60,000㎡;
- Advanced test equipment and procedures, 100% inspection before
factory;
- Enough stocks and the higest efficient shipping time guarranteed;
- Professional pre-sales and after-sales services provided.
Zhenglan Cable Technology CO., Ltd.,formerly known as HENAN
Zhengzhou Cable Co., Ltd., is one of the large scale backbone
enterprises in China's wire and cable industry. The company's
registered capital is about 4 million 6 thousand yuan and its
headquarter is located in 49 floor of the South Tower of the
Greenland Center of Zhengzhou high railway station (Petronas Twin
Towers). The factory is located in the Zhengzhou cable science and
Technology Industrial Park of the Wuzhi industrial area. It is a
modern industrial park integrating advanced research and
development technology and production technology.
FAQ
Is your company a factory or a trade company?
Factory, more than 20 years in China
How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the
samples will be ready for delivery in 3-7 days. The samples will be
sent to you via express and arrive in 3~7 days. You can use your
own express account or prepay us if you do not have an account.
What are your payment terms?
We normally accept T/T 30% deposit, 70% balance before delivery as
the main payment terms, and other payment can also be negotiated.
Trade assurance on is also available.
What’s the delivery time?
Sample order needs 3~5 days. Formal order depends on the quantity.
Usually it needs 7-30 days after get your payment.
What is your MOQ?
Generally it is 5000m.
