600 V,1Cx35mm2 Al/XLPE Covered Line Wire Aluminum Conductor
IEC60502-1
Covered Line Wire Aluminum Conductor IEC60502-1 parameters
| Nominal cross sectional area(mm²) | Wire Minimum no. | Conductor diameter(mm) | Nominal Insulation thickness (mm) | Single wire average nominal diameter maximum value(mm) | Max. Conductor resistance at 20 ℃(Ω/km) | Min insulation resistance at rated working temper(MΩ*km | Single wire tensile strength(N) |
| Aluminum | Aluminum alloy | 70℃ | 90℃ | Aluminum | Aluminum alloy |
| 10 | 6 | 3.8 | 1.0 | 6.5 | 3.08 | 3.574 | 0.0067 | 0.67 | 1650 | 2514 |
| 16 | 6 | 3.8 | 1.2 | 8.0 | 1.91 | 2.217 | 0.0065 | 0.65 | 2517 | 4022 |
| 25 | 6 | 6.0 | 1.2 | 9.4 | 1.20 | 1.393 | 0.0054 | 0.54 | 3762 | 6284 |
| 35 | 6 | 7.0 | 1.4 | 11.0 | 0.868 | 1.007 | 0.0054 | 0.54 | 5177 | 8800 |
| 50 | 6 | 8.4 | 1.4 | 12.3 | 0.641 | 0.744 | 0.0046 | 0.46 | 7011 | 12569 |
| 70 | 12 | 10.0 | 1.4 | 14.1 | 0.443 | 0.514 | 0.0040 | 0.40 | 10354 | 17596 |
| 95 | 15 | 11.6 | 1.6 | 16.5 | 0.320 | 0.371 | 0.0039 | 0.39 | 13727 | 23880 |
| 120 | 15 | 13.0 | 1.6 | 18.1 | 0.253 | 0.294 | 0.0035 | 0.35 | 17339 | 30164 |
| 150 | 15 | 14.6 | 1.8 | 20.2 | 0.206 | 0.239 | 0.0035 | 0.35 | 21033 | 37706 |
| 185 | 30 | 16.2 | 2.0 | 22.5 | 0.164 | 0.190 | 0.0035 | 0.35 | 26732 | 46503 |
| 240 | 30 | 18.4 | 2.2 | 25.6 | 0.125 | 0.145 | 0.0034 | 0.34 | 34679 | 60329 |
| 300 | 30 | 20.8 | 2.2 | 27.2 | 0.100 | 0.116 | 0.0033 | 0.33 | 43349 | 75411 |
| 400 | 53 | 23.2 | 2.2 | 30.7 | 0.0778 | 0.0904 | 0.0032 | 0.32 | 55707 | 100548 |
Conductor:
1. Aluminum Wire, 1350-H19 for Electrical Purposes.
2. Aluminum Conductors, Concentric-Lay-Stranded.
3. Aluminum Conductor, Concentric-Lay-Stranded, Coated Steel
Reinforced (ACSR).
4. Concentric-Lay-Stranded 6201-T81 Conductors.
Insulation: PVC, XLPE, PE
Standards:
GB/T 12527-2008, IEC60502,
Rated voltage: 0.6/1kV
Relative manufacturing standards: IEC61089, ASTM B231, ASTM B232,
BS215, DIN48201, DIN48204.
We can also manufacture ABC cable according to customer's special
requirements.
Application:
APPLICATION: Used primarily for overhead secondary distribution
lines.
Below construction are also commonly used around the world.
A) Duplex Service Drop
Applications:To supply 120 volt aerial service for temporary
service at construction sites,outdoor or street lighting . For
service at 600 volts or lower at a conductor temperature of 75
maximum.
B) Triplex Service Drop
Applications: To supply power from the ulility`s lines to the
consumer`s weatherhead. For service at 600 volts or less(phase to
phase ) at a conductor temperature of 75 maximum for PE insulation
or 90 maximum for XLPE insulation .
3 cores consisting of standard aluminium conductors, insulated with
XLPE insulation
+ One sheath lighting aluminium conductor with XLPE
insulation(optional)
+ One messenger Al-alloy conductor (bare or covered)
The messenger conductor can be of galvanised steel wire also.
The purpose of messenger wire is
A) It acts as load bearing wire.
B) It acts as earth or neutral conductor.
It meets or exceeds the following specifications:
C ) Quadruplex Service Drop
Applications: Used to supply 3 phase power , usually from a
pole-mounted transformer to the use`s servic head where connection
to the service entance cable is made . To be used at voltages of
600 volts or less phase to phase and at conductor temperature not
to exceed 75 for PE insulated conductors or 90 for XLPE insulated
conductors.
ALL- ALUMINUM parameters
CODE
WORD | SIZE (AWG OR KCMIL) | STRAND- ING | COVER THICKNESS (MILS) | TOTAL DIAMETER (MILS) | RATED STRENGTH (LBS.) | WEIGHT PER 1000 FT. (LBS.) | ALLOWABLE
AMPACITY+ |
| XLP | Conv. Poly | HD Poly |
| ALL- ALUMINUM |
| Apple | 6 | 1 | 30 | 222 | 445 | 31 | 31 | — | 105 |
| Plum | 6 | 7 | 30 | 238 | 510 | 56 | 34 | — | 105 |
| Pear | 4 | 1 | 30 | 264 | 710 | 47 | 47 | — | 135 |
| Apricot | 4 | 7 | 30 | 285 | 790 | 51 | 51 | — | 140 |
| Cherry | 2 | 1 | 45 | 348 | 1100 | 78 | 78 | — | 180 |
| Peach | 2 | 7 | 45 | 373 | 1220 | 84 | 84 | 85 | 180 |
| Nectarine | 1 | 7 | 45 | 408 | 1470 | 104 | 104 | — | 210 |
| Quince | 1/0 | 7 | 60 | 477 | 1790 | 136 | 136 | — | 240 |
| Orange | 2/0 | 7 | 60 | 522 | 2260 | 167 | 167 | — | 280 |
| Fig | 3/0 | 7 | 60 | 570 | 2740 | 205 | 205 | — | 320 |
| Olive | 4/0 | 7 | 60 | 626 | 3450 | 253 | 253 | — | 370 |
| Pomegranate | 4/0 | 19 | 60 | 632 | 3620 | 247 | 247 | — | 370 |
| Mulberry | 266.8 | 19 | 60 | 694 | 4470 | 305 | 305 | — | 430 |
| Annona | 336.4 | 19 | 60 | 765 | 5540 | 377 | 377 | — | 495 |
| Molles | 397.5 | 19 | 80 | 861 | 6400 | 462 | 462 | — | 545 |
| Huckleberry | 477 | 37 | 80 | 931 | 7820 | 538 | 538 | — | 610 |
| Paw Paw | 556.5 | 37 | 80 | 992 | 8950 | 619 | 619 | — | 670 |
| Breadfruit | 636.0 | 61 | 95 | 1081 | 10500 | 715 | 715 | — | 720 |
| Persimmon | 795 | 61 | 95 | 1186 | 12900 | 877 | 877 | 881 | 825 |
| Grapefruit | 1033.5 | 61 | 95 | 1326 | 16500 | — | 1118 | — | 970 |
|
+Ampacity ratings based on 75°C conductor temperature 25°C ambient
temperature elevation – sea level. Emissivity 0.91 coefficient of
absorption 0.95. Thermal resistivity of covering – 375°C M
/Watt-CM.
Wind speed 2 ft./sec. in sun. |
Product show
About Zhenglan Cable Technology Co., Ltd
Zhenglan Cable Technology CO., Ltd.,formerly known as HENAN
Zhengzhou Cable Co., Ltd., is one of the large scale backbone
enterprises in China's wire and cable industry. The company's
registered capital is about 4 million 6 thousand yuan and its
headquarter is located in 49 floor of the South Tower of the
Greenland Center of Zhengzhou high railway station (Petronas Twin
Towers). The factory is located in the Zhengzhou cable science and
Technology Industrial Park of the Wuzhi industrial area. It is a
modern industrial park integrating advanced research and
development technology and production technology.
FAQ
Is your company a factory or a trade company?
Factory, more than 20 years in China
How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the
samples will be ready for delivery in 3-7 days. The samples will be
sent to you via express and arrive in 3~7 days. You can use your
own express account or prepay us if you do not have an account.
What are your payment terms?
We normally accept T/T 30% deposit, 70% balance before delivery as
the main payment terms, and other payment can also be negotiated.
Trade assurance on is also available.
What’s the delivery time?
Sample order needs 3~5 days. Formal order depends on the quantity.
Usually it needs 7-30 days after get your payment.
What is your MOQ?
Generally it is 5000m.
