0.6/1kV Triplex Quad Service Drop Cable 4x95SQMM ABC Aerial Bundle
Cable
APPLICATION
Aerial Bundle Cable (ABC cable) is a very innovative concept for
overhead power distribution as compared to the conventional bare
conductor overhead distribution system. It provides higher level of
safety and reliability, lower power losses and ultimate system
economy by reducing installation, maintenance and operative cost.
LV Aerial Bundle Cables are designed to supply 600/1000 volt aerial
service for temporary service at construction sites, as a service
drop (power pole to service entrance), as a secondary cable (pole
to pole) or street lighting. This over-head cable provides
reinforced insulation acc. IEC 61140 and fulfill therefore Class II
acc. IEC 61140. It is not flame retardant. But this could be if
requested change to a flame retardant cable.
STANDARD
Basic design to BS 7870 / TNB Specification(IEC 60502) / HD 626 S1
/ NFC 33-209 / AS/NZS 3560-1 standards
CONSTRUCTION
Conductor: Aluminium conductor, round stranded compressed (RM).
insulation: XPLE compound, UV-resistant.
Core identification: 1, 2 resp. 3 raised longitudinal ribs on the
surface of the cores. The surface of the neutral core should have
at least 12 ribs for cross-sections up to 50 mm² and a minimum of
16 ribs for cores above 50 mm². In the case of five core bundles
the surface of the protective core should be smooth.
2 Cores : 1 rib Or Number 1
3 Cores : 2 ribs Or Number 1,2
4 Cores : 3 ribs Or Number 1,2,3
ELECTRICAL PROPERTIES
Rated Voltage:0.6/1kV
| Test Voltage | 4kV |
| Minimum laying Temperature | -20°C |
| Operating Temperature | -40°C~ +90°C |
| Maximum Short-circuit Temperature | 250°C |
| Maximum Conductor Temperature | 80°C |
| Minimum Bending radius | 18×OD |
Number of Cores xNominal
Cross Section | Overall Diameter | Weight | Maximum Conductor Resistance | Minimum Breaking Load | Current Rating |
| No.×mm² | mm | Kg/Km | Ω/Km | KN | A |
| 1x16+1x25 RM | 15.3 | 160 | 1,910 | 2,5 | 72 |
| 3x16+1x25 RM | 19.0 | 290 | 1,200 | 4,0 | 107 |
| 3x25+1x25 RM | 23.2 | 400 | 0,868 | 5,5 | 132 |
| 3x35+1x25 RM | 25.6 | 500 | 0,641 | 8,0 | 165 |
| 3x50+1x35 RM | 30.0 | 680 | 0,443 | 10,7 | 205 |
| 3x70+1x50 RM | 34.9 | 920 | 0,320 | 13,7 | 240 |
| 3x95+1x70 RM | 40.6 | 1270 | 0,253 | 18,6 | 290 |
| 3x120+1x70 RM | 44.1 | 1510 | 0,206 | 23,2 | 334 |
| 3x150+1x95 RM | 49.2 | 1870 | 0,164 | 28,7 | 389 |
| 3x185+1x120 RM | 54.9 | 2340 | 0,125 | 37,2 | 467 |
| 3x25+1x25+1x16 RM | 23.2 | 470 | 1,910 | 2,5 | 72 |
| 3x35+1x25+1x16 RM | 25.6 | 560 | 1,200 | 4,0 | 107 |
| 3x50+1x35+1x16 RM | 30.0 | 740 | 0,868 | 5,5 | 132 |
| 3x70+1x50+1x16 RM | 34.9 | 980 | 0,641 | 8,0 | 165 |
| 3x95+1x70+1x16 RM | 40.6 | 1330 | 0,443 | 10,7 | 205 |
| 3x120+1x70+1x16 RM | 44.1 | 1580 | 0,320 | 13,7 | 240 |
| 3x150+1x95+1x16 RM | 49.2 | 1940 | 0,206 | 23,2 | 334 |
| 3x185+1x120+1x16 RM | 54.9 | 2410 | 1,910 | 2,5 | 72 |
About us
Zhenglan Cable Technology CO., Ltd.,formerly known as HENAN
Zhengzhou Cable Co., Ltd., is one of the large scale backbone
enterprises in China's wire and cable industry. The company's
registered capital is about 4 million 6 thousand yuan and its
headquarter is located in 49 floor of the South Tower of the
Greenland Center of Zhengzhou high railway station (Petronas Twin
Towers). The factory is located in the Zhengzhou cable science and
Technology Industrial Park of the Wuzhi industrial area. It is a
modern industrial park integrating advanced research and
development technology and production technology.
The main products of the company are 9 major categories, 10 product
series and 60 varieties, including all kinds of bare wires, power
cables (cross-linked cables, plastic cables, etc.) special cables
(fire retardant, fire resistant, low smoke and halogen free
cables), control cables, overhead insulated cables, cloth and
wires, tec. The company’s leading products include 1KV, 10-35KV
XLPE cables, plastic cables, irradiated cables, special cables,
overhead conductors and so on. The company’s products are produced
in strict accordance with national standards(GB), and can be
produced in accordance with International Electrotechnical
Commission Standards(IEC), CCITT, British Standards (BS), German
Standards (DIN), Japanese Standards(JIS), American standard(ASTM),
French standard (NF) production, but also according to customer
requirements for non-standard cable product design and
manufacturing to meet different customer needs.
Our main products are
overhead power transmission use bare conductor(ACSR, AAC, etc)
1kv, 10kv, 35kv overhead power transmission use insulated
conductor(single core covered cable, ABC cable)
STA/SWA armored or unarmored PVC/XLPE/PE insulated LV(low voltage)
power cable
STA/SWA armored or unarmored XLPE insulated MV(medium voltage)power
cable
450/750V instrument use control cable (shielded or unshielded)
300/300V, 300/500V, 450/750V fixed installation use building wire
FAQ
Is your company a factory or a trade company?
Factory, more than 20 years in China
How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the
samples will be ready for delivery in 3-7 days. The samples will be
sent to you via express and arrive in 3~7 days. You can use your
own express account or prepay us if you do not have an account.
What are your payment terms?
We normally accept T/T 30% deposit, 70% balance before delivery as
the main payment terms, and other payment can also be negotiated.
Trade assurance on is also available.
What’s the delivery time?
Sample order needs 3~5 days. Formal order depends on the quantity.
Usually it needs 7-30 days after get your payment.
What is your MOQ?
Generally it is 5000m.
