Cavitation Vacuum RF Roller Cellulite Removal slimming Machine
Infrared RF Vacuum Roller technology combines infrared light,
bi-polar radio frequency energy and vacuum, which cause deep
heating of the fat cells, their surrounding connective tissue and
the underlying dermal collagen fibers. This type of efficient
heating and vacuum stimulates the growth of new and better collagen
and elastin which results in localized reduction in skin laxity,
body volume, and an overall improvement in skin structure and
texture.
Parameters
| Voltage | 220v/110v; 50Hz-60Hz |
| Screen | 10.4inch touch screen |
| Cavitation | 40KHz |
| Working Mode | Pulse |
| Pulse Width | 0.5s-7.5s |
| RF Energy Density | Max: 60J/cm2 |
| RF Frequency | 1MHz |
| Rev of roller | 0-36 rpm |
| Working mode for roller | 4 types |
| Laser wavelength | 940nm |
| Laser Power | Max: 20W |
| Machine Power | 500W |
Scope of Treatment:
Body contouring; Cellulite removal; Body slimming; Circumference
reduction; Skin tightening; Face lifting; Wrinkle removal; Skin
texture & tone.
Technologies in one machine - Vacuum + 940nm Near-Infrared Laser +
Bipolar RF + Cavitation + Rollers
(1) Infrared laser reduces skin impedance by heating skin and RF
energy penetrates deeply into connective tissue. The synergistic
combination of infrared laser and conducted RF energies increases
the oxygen intracellular diffusion by heating the skin.
(2) Vacuum plus specially designed rollers manipulate leads RF
penetration to be even 5-15mm. At the same time, vacuum and roller
mechanical tissue manipulation nips and stretches fibrillar
connective tissue, effectively breaks down subcutaneous fat as well
as extruded capillary vessel, Increase lymphatic drainage, promotes
metabolism and reduces or shrinks the size of the actual fat
chamber and greatly improved body contouring effect.
(3) The technology that vacuum folds skin makes RF energy penetrate
a specific folded skin, greatly improve effect and safety, even for
the upper eyelid area treatment.
Treatment Course (for reference)
① Face: 30 minutes for each treatment, once treatment per week, one
course of treatment includes ten treatments.
② Eyes: 15 minutes for each treatment, once treatment per week, one
course of treatment includes ten treatments.
③ Whole body: 45-60 minutes, local treatment: 15 minutes, twice
treatments per week, one course of treatment includes ten
treatments.
Notes after Treatment:
① Do not use cold water to clean treated area in 8 hours after
treatment (except face);
② Do not do massage on relative area;
③ Avoid solarization in the first week after treatment;
④ Can use milky skin care product on treated area;
⑤Do not eat raw, cold or spicy food in 8 hours after treatment.
Working Environment:
① Environmental temperature of operation: 10ºC-30ºC;
② Environmental temperature for keeping in store: 0-50ºC;
③ Relative humidity: ≤70%;
④ Air pressure: 860hPa～1060hPa;
⑤ Environment request: avoid direct radiation of intense light.
Note:
If the temperature in the room is too low, or the instrument have
been not used for many days, the temperature of the whole system
shall recover to 10 ºC or higher before start.
