ASTM B363 WPT2 Elbow Titanium Alloy Steel Buttweld Fitting​ ASME B16.9

Overview:

Titanium grade 2 elbow is a type of pipe fitting that is made from commercial pure titanium, also known as Grade 2 titanium. Grade 2 titanium is widely used due to its excellent corrosion resistance, good formability, and weldability. It contains a small amount of palladium, which enhances its corrosion resistance.

An elbow, in the context of pipe fittings, is a device that changes the direction of the flow in a piping system. It is typically used to connect two pipes of different diameters or to change the direction of fluid flow in a piping system.

When it comes to applications, titanium grade 2 elbows are commonly used in industries where corrosion resistance and strength-to-weight ratio are critical factors, such as chemical processing, marine environments, aerospace, medical implants, and more.

The specific design, dimensions, and specifications of a titanium grade 2 elbow can vary based on the intended application and industry standards. It's essential to ensure that the elbow meets the required standards and specifications for the specific application.

Overall, titanium grade 2 elbows are valued for their corrosion resistance, lightweight nature, and strength, making them a valuable component in various industrial and commercial applications.

Specification:

Chemical Composition:

Mechanical Properties:

Dimension:

Nominal Size		Outside Diameter at Bevel (mm)	Center to End (mm)
			90° Elbow		45° Elbow
DN	NPS	O.D.	A		B
			LR	SR	LR
15	1/2	21.3	38	...	16
20	3/4	26.7	38	...	19
25	1	33.4	38	25	22
32	1 1/4	42.2	48	32	25
40	1 1/2	48.3	57	38	29
50	2	60.3	76	51	35
65	2 1/2	73.0	95	64	44
80	3	88.9	114	76	51
90	3 1/2	101.6	133	89	57
100	4	114.3	152	102	64
125	5	141.3	190	127	79
150	6	168.3	229	152	95
200	8	219.1	305	203	127
250	10	273.0	381	254	159
300	12	323.8	457	305	190
350	14	355.6	533	356	222
400	16	406.4	610	406	254
450	18	457.0	686	457	286
500	20	508.0	762	508	318
550	22	559.0	838	559	343
600	24	610.0	914	610	381
650	26	660.0	991	660	406
700	28	711.0	1067	711	438
750	30	762.0	1143	762	470
800	32	813.0	1219	813	502
850	34	864.0	1295	864	533
900	36	914.0	1372	914	565
950	38	965.0	1448	965	600
1000	40	1016.0	1524	1016	632
1050	42	1067.0	1600	1067	660
1100	44	1118.0	1676	1118	695
1150	46	1168.0	1753	1168	727
1200	48	1219.0	1829	1219	759
Notes: 1) Besides these, GB/T 10752, SH 3408, SH 3409, HG/T 21635, HG/T 21631, SY/T 0510, DL/T 695, EN 10253 etc.are also applied. 2) The elbow with NPS over 48 shall be made subject to the sizes agreed by purchaser and manufacturer.