RNA816T Wind Power Monitoring Tilt Sensor Inclinometer Engineering
Vehicle Leveling
▶ GENERAL INTRODUCTION
RNA816T/826T 100% homemade inclination sensor is a domestic product
developed by RION for high-end users. All internal components are
100% domestic, including microcontroller, MEMS measurement unit,
power circuit, signal circuit, etc. Each product has undergone full
temperature compensation and 360 hours of long-term stability
testing before leaving the factory to ensure that it maintains the
best performance in different working conditions and long-term test
conditions. The product integrates two communication p rotocols,
industry standard MODBUS and hexadecimal. The product is presented
with the host computer software for real-time display, recording
and analysis of the original data. The output interface RS422 and
RS485 are optional, non-contact installation and strong resistance
to external electromagnetic interference. , Strong ability to
withstand shock and vibration, widely used in satellite
communication system processing vehicles, radar antenna vehicles,
etc. This series of products provides multiple choices for the
localization of China's equipment manufacturing industry, provides
a higher guarantee for China's industrial automation, and is born
to help the revival of China's industrial manufacturing.
▶ MAIN FEATURE
★ 100% parts localization
★ Resolution 0.0008°
★Size: L82×W70×H42mm
★ DC 9～36V wide voltage input
★ Single-axis Y-axis range ±90°
★ Dual-axis range ±1～±60° optional
★ IP67 protection grade
★ Wide temperature operation -40～+85℃
★ Single/double axis inclination measurement
★ Output mode RS422, RS485 are optional
★ Horizontal/vertical installation modes are optional
▶ APPLICATION
★ Wind power monitoring
★ Bridge and Dadian monitoring
★ Ancient building monitoring
★ High-speed rail track monitoring
★ Ground satellite communication vehicles
★ Railway gauge ruler and gauge leveling
★ Satellite communication vehicle
★ Geological equipment tilt monitoring
★ Engineering vehicle levelin
▶ PARAMETERS
| RNA816T/826T | CONDITION | PARAMETERS | | UNIT |
| Measure range | | ±5 | ±10 | ±30 | ±60 | ±90 | ° |
| Measure axis | | X Y | X Y | X Y | X Y | Y | axis |
| Resolution | | 0.0008 | 0.0008 | 0.0008 | 0.0008 | 0.0008 | ° |
| Measure accuracy(rmse) | @25℃ | 0.001 | 0.0015 | 0.002 | 0.005 | 0.007 | ° |
| Zero temp coefficient | -40～85℃ | 0.0002 | 0.0002 | 0.0002 | 0.0002 | 0.0002 | °/℃ |
| Sensitivity temp. coefficient | -40～85℃ | ≤20 | ≤20 | ≤20 | ≤20 | ≤20 | ppm/℃ |
| Power on time | | <0.5 | <0.5 | <0.5 | <0.5 | <0.5 | S |
| Response frequency | | 20 | 20 | 20 | 20 | 20 | Hz |
| Output rate | 5Hz/10Hz/25Hz/35Hz/50Hz/100Hz (can be set) |
| Ouput signal | RS485/RS422 |
| EMC | According to EN61000 and GBT17626 |
| MTBF | ≥98000 hours/time |
| Insulation Resistance | ≥100MΩ |
| Shockproof | 100g@11ms,3 Axial Direction (Half Sinusoid) |
| Anti-vibration | 10grms,10～1000Hz |
| Protection grade | IP67 |
| Cables | Standard 1 meter length, wear-resistant, wide temperature, shielded
cable, aviation connector, weight ≤ 150g |
| Weight | ≤400g(exclude cable) |
| EMC | GB/T17626.2(2018)/IEC61000-4-2(2008) (electrostatic discharge
immunity test) |
| GB/T17626.4(2018)/IEC61000-4-4(2012) (Electrical fast transient
pulse group immunity test) |
