4/3 servo solenoid valves with on-board electronics (OBE), positive
overlap and position feedbac
4WRPE 4WREF 4WREE 4WREQ 4WREEM Series Hydraulic Proportional
Directional Control Valve 4WREE 10 W1-75-2X/G24K31/A1V
Directional valves type WE are solenoid operated directional spool
valves. They control the start, stop, and direction of a flow.
These directional valves basically consist of housing; one or two
solenoids; control spool; and no, one, or two return springs. A
full array of spools are possible with variations in voltage and
electrical connection, all within the program. Flow and pressure
rates from 4000 PSI to 5000 PSI and 21 GPM to 32 GPM cover a wide
range of applications.
Features
– Directly operated NG6 and 10 valves with positive overlap,
actuated on both sides and position-controlled, symbol E or W –
Control solenoid with on-board electronics (OBE), deadband
compensation and gain calibrated at the factory
– Electrical connection 6P+PE (standard), signal input:
differential amplifier with interface A1 = ±10 V (F1 on request)
– For subplate attachment, mounting hole configuration NG6 to ISO
4401-03-02-0-94 and NG10 to ISO 4401-05-04-0-94
– Plug-in connectors to DIN 43563-AM6, see catalog section RE 08008
(order separately)
– Subplates as per catalog section RE 45053 and RE 45055 (order
separately) Variants on request
– For standard applications, such as e.g. Valve electronics 11P+PE
(plug-in connector
Size 6
* For subplate mounting:
Porting pattern according to ISO 4401-3, NFPA T3.5.1M R1,
and ANSI B93.7 D 03
* Wet-pin AC or DC solenoids
* Solenoids with detachable coil
* Electrical connection as individual or central connection
* Optional spool position monitoring
* Smooth switching characteristics
- Direct solenoid actuated directional spool valve high performance
version
- Wet pin DC or AC solenoids with removable coil
- Solenoid coil can be rotated through 90o
- It is not necessary to open the pressure tight chamber when
changing the coil
- Electrical connections either as individual or central
connections
- Hand override, optional
General |
Construction | Spool type valve, directly operated, without steel sleeve |
Actuation | Proportional solenoid with position control, OBE |
Connection type | Subplate, mounting hole configuration NG6 (ISO 4401-03-02.0-94) |
Mounting position | Optional |
Ambient temperature range °C | -20 .... +50 |
Vibration resistance, test condition | Max. 25 g, shaken in 3 dimensions (24 h) |
Hydraulic (measured withHLP46, 0oi=40°C士5°C) |
Pressure fluid | Hydraulic oil to DIN 51524 .. 535, other fluids after prior
consultation |
Viscosity range recommended mm2/s
max. permitted mm2/s | 20... 100 |
10....800 |
Pressure fluid temperature range °C | -20.. +70 |
4WRPE 6 E 08SJ–2X/G24K0/A1M 0 811 404 148
4WRPE 6 E 18SJ–2X/G24K0/A1M 0 811 404 140
4WRPE 6 E 32SJ–2X/G24K0/A1M 0 811 404 141
4WRPE 6 W 08SJ–2X/G24K0/A1M 0 811 404 145
4WRPE 6 W 18SJ–2X/G24K0/A1M 0 811 404 142
4WRPE 6 W 18SJ–2X/G24K0/F1M 0 811 404 146
4WRPE 6 W 32SJ–2X/G24K0/A1M 0 811 404 143
4WRPE 6 W 32SJ–2X/G24K0/F1M 0 811 404 147
4WRPE 6 E 08SJ–2X/G24K0/A1M 0 811 404 148
4WRPE 6 E 18SJ–2X/G24K0/A1M 0 811 404 140
4WRPE 6 E 32SJ–2X/G24K0/A1M 0 811 404 141
4WRPE 6 W 08SJ–2X/G24K0/A1M 0 811 404 145
4WRPE 6 W 18SJ–2X/G24K0/A1M 0 811 404 142
4WRPE 6 W 18SJ–2X/G24K0/F1M 0 811 404 146
4WRPE 6 W 32SJ–2X/G24K0/A1M 0 811 404 143
4WRPE 6 W 32SJ–2X/G24K0/F1M 0 811 404 147
