Circular Blade PCB Separator, 400mm Length, Single Motor Control

Blade Moving PCB Separator, HS-300, 400mm Length, Single Motor Control

Introduction

This machine(HS-300) is the blade moving PCB separator, using upper circular and down linear blade design,before cutting, put the v-groove onto the linear blade,the upper circular blade moving to finish spearating, the force stress is relative low, the board don't need move will protect the components on the board, avoid damaging.

Features

1. The use of microcomputer program control, precise pointing, strong stability. A knife cut off 0-360MM length within a single board.
2. Cutting board walking knife speed adjustable high and low two kinds of speed 500mm/s and 300mm/s, knife speed, if you can improve the quality of products, no burrs, no burrs.
3. Knife wheel travel: 0-360mm (tool length can be customized). Knife wheel up and down height fine-tuning: 0-2mm in order to apply to a variety of PCB board thickness, to solve the PCB board V-CUT slot depth problem. The height of the operating table can be adjusted: 0-50mm.
4. Knife travel can be set with the length of the board to move forward to stop the fixed point, stop the fixed point is set manually.
5. The depth range of the backstop: no limitation. Maximum board cutting width: unlimited, maximum board cutting length: 360mm, maximum board thickness: 0.2-5mm, maximum thickness between V grooves: 0.25-2.0mm.
6. Upper and lower knife for the imported high-speed steel material, durable, knife unfavorable, can be re-research.
7. Can be matched with a conveyor belt, easy to cut the PCB board automatically sent out.
8. Lifting platform lifting, platform height adjustment, can affect the quality of the product, not easy to cut bad products.
9. Limit device, can be applied to different sizes of products, thus improving work efficiency.

Specification

About Packaging

Shenzhen HanSome Technology Co.,Ltd(HSTECH)was estabilished in 2012 by prefessional and experienced engineer who wroked many years in EMS company,we specilized in PCB handling equipments at first, then we develop the PCB depaneling machine and SMT cleaning machine. HSTECH not only have professional technical team for R&D,but also have a outgoing and experienced marketing team for research and develop, grasps products developing directions, updates the products and technics to meet the continue changing demands. In the past years,we have been always keep innovating and exploing to make cost-efficient products to help our customers saving cost and labor, improving the production efficiency at the same time.
HSTECH set the goal for "High quality and Smart”, that based on the concept of "Quality-Oriented and Customer-orented", and combined the industry feature, smart technology persuit for the smart factory.As for the after-sale service, we insist on "responsibility", we will take reaction at the first when we got quality feedbacks,and service our customers all the time.