1525-1570nm Single-channel Standard MEMS Variable Optical
Attenuator with FC/UPC
Product Description
The MEMS Variable Optical Attenuator is based on the
Micro-Electro-Mechanical System technology. These MM series
attenuators can be used to achieve the remote control of the power
in the networks by a MEMS chip with a movable mirror on the
silicon. The mirror attenuates the laser light power by coupling
the input beam onto the output fiber. The applied voltage to the
device controls the mirror tilt angle, thus the desired attenuation
amount.
Gezhi Photonics offers standard, mini and micro MEMS VOAs in a
fast, low cost miniature package. These best-in-class attenuators
are available in either normally-open or normally-closed
configurations and with an integrated tap option. They are driven
by applying an electrical voltage.
Product Highlights
1.Available in a Variety of Connector Types
2.Standard Variable Attenuation Values of 1dB up to 40dB
3.Attenuating Material-ion Doped Fiber
4.1525-1570nm/1570-1610nm Wavelength Singlemode Attenuators
5.Precision Polishing for Reduced Back Reflection
6.High Precision Fiber Optic Ceramic Ferrules
Features
1.Single-Channel Standard Variable Optical Attenuator MEMS
The Optical attenuator has precise attenuation values, low PDL, low
insertion loss and fine reflection polishing.
Wide Attenuation Range from 0dB to 40dB
The MEMS attenuators provide accurate attenuation for connected
devices. | Various Connectors
The MEMS attenuators have a variety of connectors to suit different
needs. | High Quality Collimator
The attenuators have high environment reliability and high response
speed. |
2.Advanced MEMS Technology to Balance Signal Strengths
A beam from an input fiber bounces off the MEMS mirror and into a
output fiber. By slightly tilting the mirror, the input and output
fibers are decoupled and the signal is attenuated.
Application
The MEMS VOA can be used to achieve equalization in DWDM systems
and gain tilt control in EDFAs. It is also applied in test
equipments.
Our Factory
FAQ
Q1:Can I have a sample order? What is your MOQ ?
A1:Sample order is welcome to test and check quality. We don't MOQ,
1pcs sample is available. Also Mixed samples are acceptable.
Q2: What's the Lead time?
A2: The normal lead time is about 1week, For big quantity and
special products. Please check lead time with our sales
representative. But we keep stock for some products, could ship 1-3
days after receiving payment.
Q3: What are the payment terms?
A3: Payment term: T/T, Paypal, Western union,cash payment, Alibaba
etc.
Q4: What is your warranty time?
A4: 3 years' warranty.
Q5: Could I use our own logo, label and package?
A5: Yes, we could provide OEM service which according to your
requirements, design products label, logo, PN, SN, package.
