Part 1 Chemical product and company identification
Product name: 8662 Two-component PU Structural Adhesive.
Application: Self-adhesion or mutual adhesion of metal, aluminum and aluminum
honeycomb, PU, wood, foam insulation materials, ceramics, cement,
glass and fiberglass.
Company name: Hubei Huitian New Material Co., LTD
Address: No. 7 Hangtian Road, Xiangyang City, Hubei Province
Tel: (86) 710 3626888
Fax: (86) 710 3820881
Emergency No.: 86 710 3826888
Part 2 Composition/information on ingredients
Chemical name CAS Content%
A component
Polyol (Caster Oil) 8001-79-4 30-50
Calcium Carbonate 471-34-1 40-60
Chemical name CAS Content%
B component
PAPI 101-68-8 90-100
Part 3 Hazards summarizing
A component:
Contact method: skin contact, inhalation, eye contact
Health hazard: Not available
Environment hazards: Not available
Fire hazard: flammable
B component:
Contact method: skin contact, inhalation, eye contact, swallowing
Health hazard:
Acute intoxication
1. Inhalation of MDI vapor may cause irritation to respiratory
tract and lead to headache, rhinorrhea, pharyngodynia, asthma,
chest distress, dyspnea, lung function decline. Contact of high
concentration vapor may cause bronchitis, bronchospasm, and
pulmonary edema
2. Skin contact may cause irritation to skin, allergy and
dermatitis.
3. Swallowing may cause abdominal spasm and emesis
Chronic intoxication
Long time exposure may cause permanent lung function decline, skin
rash and anaphylaxis
Environment hazards: may cause water body, soil and air pollution
Fire hazard: flammable at high temperature or when exposed to naked flames.
Part 4 First aid measures
A component:
Skin contact: Take off the contaminated clothing, flush skin with plenty of
water for at least fifteen minutes.
Eye contact: Hold the eyes open, wash with plenty of water for at least fifteen
minutes and seek for the medical aid.
Inhalation: Take the person into the fresh air. If there is difficulty in
breathing, seek for medical aid
Swallowing: Rinse the mouth and drink milk or egg white.
B component:
Skin contact: Take off the contaminated clothing, flush skin with plenty of
water for at least fifteen minutes (use soap if possible), if
symptom happens, seek for the medical aid.
Eye contact: Hold the eyes open, wash with plenty of water for at least fifteen
minutes and seek for the medical aid
Inhalation: Take the person into the fresh air. If there is difficulty in
breathing, seek for the medical aid.
Swallowing: Drink warm water and DO NOT induce the patient to vomit. If the
patient is unconscious or has spasm, do not drink anything. Seek
for medical aid immediately
Part 5 Fire precautions
Fire hazard: Flammable at high temperature or when exposed to naked flames.
Hazardous combustion products: Carbon monoxide, Carbon dioxide, oxynitride
Fire extinguishing media: Use water spray, foam, carbon dioxide and extinguishing powder
Fire-fighting method: Cool endangered containers with water spray jet. Remove the
containers from fire to open place if possible.
Part 6 Accidental release measures
A component:
Personal protection: Wear protective clothing
Environment protection: Do not empty into drains/surface water/ground water without
treatment
Clean-up method: Remove with liquid-absorbing material (sand, lime powder, soda
ash), or dilute with plenty of water then empty into drain system.
If there is a large amount of leakage, collect and dispose of
contaminated material as waste according to Part 13.
B component:
Personal protection: Wear protective equipment (clothing, and glove). Before wearing
protective clothing, do not contact leaking container and leakage.
Quarantine the contaminated area.
Environment protection: Put out all the fire sources and cut off leak sources.
Clean-up method:Remove with liquid-absorbing material (sand, soil, vermiculite). If
there is a large amount of leakage, collect and dispose of
contaminated material as waste according to Part 13. Wash the
contaminated ground with 3-8% ammonium hydroxide and 2-7%
detergent.
Part 7 Handling and storage
Handling:
Ensure good ventilation at the work place.
Use explosion-proof equipment
Wear suitable protective clothing, safety glasses and gloves
Avoid open flames and sources of ignition.
Avoid contact with oxides, acid and base
Avoid skin and eye contact
Take measures to prevent the build-up of electronic charges.
Keep out of the reach of children
When using, do not eat, drink or smoke.
Storage:
Ensure that storage and workrooms are adequately ventilated
Keep container tightly sealed at 15-35℃
Keep away from heat and fire sources.
Keep away from acid, base, ammonia, alcohol and amine.
Store in a cool and dry place
Take precautionary measures against static discharges during
storage and transport.
egs.
