Equipment overview:
AC220 3.5KW Salt Spray Tester Machine,576L,IE42 series,this seriese of equipment is a device that simulates the dispersion
system composed of tiny droplets of salt in the atmosphere. It is
widely used in electroplating and spray painting of products in the
electronics, electrical, automobile, motorcycle, hardware, plastic,
FPC soft board, and other industries. , coatings, and anodic
treatment before conducting a salt spray corrosion test to evaluate
its surface corrosion resistance.Salt Spray Tester is used to test the anti-erosion quality of the surface of all
materials after the rust-proof of painting, coating,
electroplating, anoding and rust-proof of greasing.
Applicable standards:
GB/T242317-2008
GB/T242318-2000
GB/T10125-1997
GB/T10587-2006
GB105932-1990
GB/T1765-1979
GB/T242317-1993
GB/T1771-2007
GB5938-86
GB/T1771-91
Technical Parameters:
| Product name | Technical Parameters |
|---|
| Safety protection device | ●When The Salt Water Is Low, The Heater Power Is Automatically Cut
Off ●When The Temperature Exceeds, The Heater Power Supply Is
Automatically Cut Off ●When The Laboratory Water Level Is Low, The
Heater Power Supply Is Automatically Cut Off |
| Temperature fluctuation | ±0.5℃ |
| Sample Stand | The Laboratory Basket Frame Adopts A Plane Indexing Frame, The
Placing Angle Is 15 Degrees And 30 Degrees, And On All Sides The
Direction Of Falling Fog And Receiving Fog Is Completely The Same. |
| The amount of salt spray settling | 1～3ml/h.80cm2 |
| Power Supply | AC220;V50Hz;3.5KW |
| Spray pressure | 1.00±0.01kgf/cm² |
| Box structure | ●The Inner And Outer Boxes Of The Laboratory: The Inner And Outer
Boxes Of The Laboratory Are Made Of Grade A PVC Polyvinyl Board,
The Thickness Of The Whole Machine Is 8mm, And The Acid And Alkali
Resistance And Temperature Resistance To 78℃. ●Laboratory Seal
Cover: The Seal Cover Of The Laboratory Is Made Of Grade A PVC
Plate, The Thickness Is 8mm, The Surrounding Reinforcement Is 13mm,
And The Acid And Alkali Resistance And Temperature Resistance Are
78℃ |
| Water refill method | Automatic/manual Dual Water Supply Mode, Automatic Water Inlet With
A Set Of Water Purifier |
| Spray method | Continuous Spray + Intermittent Spray |
| Product name | Salt Spray Test Chamber PP Material Button |
Customization:
Environmental Test Chamber -AC220 3.5KW Salt Spray Tester Machine,576L,IE42 series
We can provide custom design service for this Salt Spray Test
too,welcome provide us detail specification sheet.
Brand Name: Infinity Machine
Model Number: IE42120L
Place of Origin: Made In China
Certification: CE,ISO
Carton size: WxHxD(mm): inner carton size:1200*800*600mm,master carton
size:2080*1050*1300mm
Box structure: The Inner And Outer Boxes Of The Laboratory Are Made Of Grade A
PVC Polyvinyl Board, The Thickness Of The Whole Machine Is 8mm, And
The Acid And Alkali Resistance And Temperature Resistance To 78℃.
The Seal Cover Of The Laboratory Is Made Of Grade A PVC Plate, The
Thickness Is 8mm, The Surrounding Reinforcement Is 13mm, And The
Acid And Alkali Resistance And Temperature Resistance Are 78℃.
Temperature uniformity: ≦1.0℃
Temperature fluctuation: ±0.5℃
Infinity Machine's High And Low Temperature Test Chamber,
Environmental Test Chamber, and Climate Test Chamber are designed
specifically to meet the rigorous demands of scientific and
industrial testing. With a temperature uniformity of ≦1.0℃ and
temperature fluctuation of ±0.5℃, our Environmental Test Chamber is
the perfect choice for your testing needs. Our chamber is CE and
ISO certified, made in China, and comes with a box structure of
grade A PVC Polyvinyl Board with a thickness of 8mm, with acid and
alkali resistance and temperature resistance of 78℃.
Support and Services:
We offer technical support and service for Environmental Test
Chambers. Our professional team of engineers is available to help
you troubleshoot and provide advice to ensure that your device is
operating correctly.
We offer a comprehensive range of services, including:
- Installation and commissioning of environmental test chambers
- Regular scheduled maintenance
- Emergency repair services
- Calibration of temperature and humidity
- Replacement parts
If you have any questions or need technical support, please don’t
hesitate to contact us.
Packing and Shipping:
The Environmental Test Chamber should be packaged in a manner that
ensures the safety of the product during transit. The chamber
should be placed in a robust cardboard box with suitable cushioning
material to protect it from shocks and vibrations. Inside the box,
the chamber should be secured with straps or a similar dampening
material. The box should be sealed with tape or a similar adhesive
material to keep it airtight.
The chamber should be shipped with a shipping label that includes
the contact details of the recipient and the sender. The box should
be clearly labeled with the contents and the weight of the package.
If the package is too heavy, it should be shipped on a pallet with
proper securing straps.
FAQ:
- Q: What is the brand name of the Environmental Test Chamber?
A: The brand name of the Environmental Test Chamber is Infinity
Machine.
- Q: What is the model number of the Environmental Test Chamber?
A: The model number of the Environmental Test Chamber is IE4260L.
- Q: Where is the Environmental Test Chamber made?
A: The Environmental Test Chamber is Made In China.
- Q: What certifications does the Environmental Test Chamber have?
A: The Environmental Test Chamber has CE and ISO certifications.
- Q: What kind of environmental conditions can the Environmental Test
Chamber simulate?
A: The Environmental Test Chamber can simulate various
environmental conditions such as temperature, humidity, altitude,
and vibration.
Contact us
Mobile/Whatsapp:+86-189-2293-3631
Tel:+86-(0)76987796906
E-mail: sales@infinity-machine.com
https://www.tester-machine.com/
Infinity Machine International Inc
No.103 Building 4 ,Furong Industrial Center, Wangniudun Town,
523200, Dongguan City, China
