Bridge Girder Launcher Crane 400 Ton For Highway Railway Construction 2 Years Warranty

400 Ton Bridge Girder Erection Crane For Highway And Railway Construction

Product Description

In addition to the standard bridge operation, the 400 Ton Bridge Girder Erection Crane can also meet the requirements of first and last span
erection, curve erection, variable span erection, span continuous beam, combination beam, continuous steel structure, etc. Existing bridge erection, simple support span continuous erection and other working conditions.It has the advantages of simple erection, fixed point hoisting, good lifting stability, high operating efficiency, safety and reliability, easy to adjust span and easy to operate.

Product Characteristics

• The arm can move up and down, move back and forth, swing the head to the left and right, can set up an inclined bridge (0-45 °), a slope bridge 5% (in Yunnan, Malaysia, Greece, the Zui slope is up to 8%), small curve convenient and quick;
• The whole machine adopts step-by-step advancement, and the guide arm passes through the hole;
• It adopts gear and rack drive, which has good self-locking performance.
• Relying on driving to drive the outriggers forward, no need to configure the outriggers vertical movement force;
• Use the electric machine to move horizontally to realize the full-scale mechanized falling beam;
• Adopt the hydraulic cylinder to push and add the whole machine to move the way, once the falling edge beam is in place;
• The outriggers use the driving power to achieve longitudinal movement and reduce the power of the whole machine;
• The electrical system is controlled by a programmable controller, with good interlocking performance, preventing two directions from acting simultaneously, effectively controlling misoperations, and ensuring safety and reliability.

Maintenance

• Routine maintenance: (performed by the on-duty driver before, after and during operation)

1. Clean the dust and oil on the driver's cab and airframe regularly to keep the inside and outside of the machine as clean as possible;
2. Check whether the brake clearance is appropriate;
3. Check whether the keys and coupling bolts on the coupling are tight;
4. Check whether each safety device is sensitive and reliable;
5. check the wear of brake belts and wire ropes;
6. Check if the contacts of the controller are close and consistent;

• Second level maintenance (per month by the driver)

1. Fill the rolling bearings with grease;
2. Check the insulation of all electrical equipment;
3. Whether the control screen, protection panel, controller, resistor, each terminal block and terminal nut are tight;
4. Check the oil quantity of the reducer, the oil quantity of the brake hydraulic solenoid and the lubrication condition. When the amount of oil is insufficient, lubricating oil and grease should be added.

• Third and second level maintenance (once quarterly or semi-annually. Under the guidance of technical staff, performed by the driver)

1. Lubricate the rolling bearing;
2. check the insulation of all electrical equipment;
3. Whether the control panel, protection panel, controller, resistor, each terminal block, and the connection nut are tight.
The above is the maintenance method of the bridge crane. For large machines such as bridge cranes, we must remember to carry out maintenance work regularly in a certain way, and we must not neglect to prevent engineering delays and losses due to insufficient daily maintenance.

Parts Of Crane

Dowell Crane Co., Ltd is a China-leading company in crane manufacture and crane trading business. We serve a broad range of customers from all over the world, providing a complete set of advanced lifting projects, including Gantry crane, Bridge crane, Portal crane,
Beam launcher, Electric winch, Lifting platform and so on. Dowell crane is sticking to the global optimal procurement of raw materials and parts to make innovations in technical details of electric control and mechanical transmission,etc.We continue the wide and deep cooperation with the well-known transnational enterprises such as Simens and Sew in Germany, Schneider in France and ABB in Switzerland, etc.

Company Strength

Dowell Crane Co., Ltd is a China-leading group of crane businesses which was founded in 1955, Only one company has 60years manufacture experience. And serving a broad range of customers all over the world to provide a complete set of advanced lifting project, including Gantry crane, Bridge crane, Jib crane, Accessory. Our clients include manufacturing and process industries, shipyards, ports and so on. Regardless of your lifting needs, dowellcrane Machinery Group is committed to providing you with lifting equipment and services that increase the effectiveness and value of your business.

a). Dowell Crane Co., Ltd have already obtained the CCC,CE,BV,SGS,ISO OHSAS certification's and have won over 60 honors.

b). China's leading mechanical research and design institute and famous university provides advanced technical support for us.

c). Serviced for more than 5000 companies, and the products popular in more than 40 countries.

d). Through decades of unremitting efforts, now, Dowell Crane Co., Ltd covers an area of 180,000 square meters and over 380 sets of advanced equipments. Management staff reach to 860, and our worker have more than 10000.

Packing & Delivery terms:

1. Hoist and electric parts will be packed by plywood crate, for avoiding the demage from goods crash and impact during the delivery.

2. Girders and other main parts will be packed by plastic woven cloth, for preventing rust from soppy condition during the transportation.

3. Only the best transport solution will be taken for saving your cost uttermost on finance, security and time.