Launcher Cursed Bridge Construction Crane 300T Beam Girder 2 Years Warranty

300T Beam Girder Launcher Cursed Bridge Construction Crane for Sale

Product Description

300T Beam Girder Launcher Cursed Bridge Construction Crane is suitable for the construction of bridge for roads, railways and other bridge erection construction site. Its main function is to lift the prefabricated beams, then transported onto the prefabricated pier. The Beam Launching Machine has big difference from the general cranes.

Current collector replacement

300T Beam Girder Launcher Cursed Bridge Construction Cranes are devices that place precast beams on precast pier. Overhead cranes belong to the crane category because their main function is to lift the beam, then transport it to that location and then lower it.
300T Beam Girder Launcher Cursed Bridge Construction Crane is very different from bridge erection machine. The required conditions are harsh and there is movement in the beam or longitudinally. Bridge construction machines are divided into highway bridges, traditional railway bridges and passenger railway bridges.
300T Beam Girder Launcher Cursed Bridge Construction Crane usually consist of three main parts: mechanical, electrical and metal structures. The external image of the viaduct is a single-span slab bridge supported by two ends supported on two parallel overhead rails. Double girder bridge cranes are widely used in indoor and outdoor industrial and mining enterprises, iron and steel chemical industry, railway transportation, port terminals and logistics turnover departments.

Once the double beam bridge crane is powered off, sparks may be generated in the power transmission duct, which may damage the current collector in the equipment. If the problem needs to be improved, on the one hand, the chamfer of the current collector brush can be appropriately increased and smoothed; at the same time, the spring strength and elasticity between the two opposite brushes of the current collector can be increased to ensure that the spring can recover freely.
On the other hand, try to deepen and strengthen the spring seat in the current collector to ensure that the recovery spring of the brush is not prone to threading during operation. On the other hand, make sure that the connection blocks of the two parts of the security slide line are chamfered to ensure a smooth transition for the current collector. At the same time, in order to ensure the normal use of the security sliding line, the operation, maintenance and maintenance of the equipment must be standardized to reduce the possibility of failure.

On-site Installation

Check regularly

The bridge crane is a lifting equipment designed for bridge construction. This device is more convenient than other lifting equipment, easy to install and disassemble, has high economic value, and is often used for the mobility of municipal engineering.
The bridge crane can only be used after the operators have been trained and qualified. During the operation, it is necessary to strictly standardize its own behavior and operate in accordance with the operation requirements. Check the equipment regularly to make sure everything is normal before continuing.
When using the bridge crane, we must pay attention to the following points:
1. Make sure that the personnel used are professionally trained and skilled in operation;
2. Regularly maintain equipment, replace parts, and add lubricants;
3. No matter what the problem, all problems must be checked until the problem is completely resolved;
During the operation of the bridge crane, regular inspections are performed and an inspection report is written.
In order to ensure the safe operation of the bridging machine, some routine security checks are required during the operation of the bridging machine. The inspection items and points are as follows:
(1) Lifting height limiter, stroke limit switch and interlocking mechanism have normal performance and reliable security.
(2) The main components meet the security requirements: the opening increase is less than 15% of the original size and the torsional deformation is less than 10%; the wear of the hook bushing is less than 50% of the original size, and the wear of the hook mandrel is less than 5%, without flaking, burrs, Weld repair.
Hooks and pulleys have no obvious defects. The diameter of the steel wire surface wear and corrosion is less than 40% of the wire diameter. The broken wire is less than 10% of the number of twist buses. No breakage, no obvious thinning, no core detachment, dead corner distortion and extrusion deformation. , Annealing, burning phenomenon. The two ends of the steel wire rope are connected. The clamps, clamps and clamps are well connected without looseness. The clamps are not less than 2 and the number of clamps is not less than 3.
There is no crack in the reel, and there is no looseness in connection and fixing; wall wear is less than 20% of the original wall thickness; security coil is not less than 2 turns, and the diameter ratio of the reel to the wire rope meets the requirements. The balance is fixed, and the wire rope should meet the requirements. The brake has no cracks, no looseness, no severe wear, and the dimensions on both sides of the brake gap are the same. It has sufficient braking force, and the brake belt wear is less than 50% of the original thickness.

Dowell Crane Co., Ltd is a China-leading company in crane manufacture and crane trading business. We serve a broad range of customers from all over the world, providing a complete set of advanced lifting projects, including Gantry crane, Bridge crane, Portal crane,
Beam launcher, Electric winch, Lifting platform and so on. Dowell crane is sticking to the global optimal procurement of raw materials and parts to make innovations in technical details of electric control and mechanical transmission,etc.We continue the wide and deep cooperation with the well-known transnational enterprises such as Simens and Sew in Germany, Schneider in France and ABB in Switzerland, etc.

Company Strength

Dowell Crane Co., Ltd is a China-leading group of crane businesses which was founded in 1955, Only one company has 60years manufacture experience. And serving a broad range of customers all over the world to provide a complete set of advanced lifting project, including Gantry crane, Bridge crane, Jib crane, Accessory. Our clients include manufacturing and process industries, shipyards, ports and so on. Regardless of your lifting needs, dowellcrane Machinery Group is committed to providing you with lifting equipment and services that increase the effectiveness and value of your business.

a). Dowell Crane Co., Ltd have already obtained the CCC,CE,BV,SGS,ISO OHSAS certification's and have won over 60 honors.

b). China's leading mechanical research and design institute and famous university provides advanced technical support for us.

c). Serviced for more than 5000 companies, and the products popular in more than 40 countries.

d). Through decades of unremitting efforts, now, Dowell Crane Co., Ltd covers an area of 180,000 square meters and over 380 sets of advanced equipments. Management staff reach to 860, and our worker have more than 10000.

Packing & Delivery terms:

1. Hoist and electric parts will be packed by plywood crate, for avoiding the demage from goods crash and impact during the delivery.

2. Girders and other main parts will be packed by plastic woven cloth, for preventing rust from soppy condition during the transportation.

3. Only the best transport solution will be taken for saving your cost uttermost on finance, security and time.