BPZK04 0.25%F.S Two Point Switch Digital Electronic Pressure Switch
BPZK04 Electronic Pressure Switch
Introduction of electronic pressure switch:
BPZK04 differential electronic pressure switch is a fully digital
measurement and control product that integrates pressure
measurement, point control display, and transmission output. It can
be directly installed at the pressure measurement point in the
field or on the control screen of the test bench. It allows on-site
setting of parameters such as zero value, full-scale value,
Product Features of Electronic Pressure Switch:
1. Can provide up to two control relay outputs, with the ability to
set arbitrary relay values and states for precise and reliable control.
2. Can be used to protect the system from too high or too low
pressure damage. When the pressure exceeds or falls below a set
threshold, the controller triggers the appropriate action, such as
closing the valve or stopping the pump.
3. Can be used to regulate the pressure in the system to ensure
that it remains within the set range. When the pressure deviates
from the set value, the controller will adjust the working state of
the actuator to bring the pressure back to the set range.
4. can be used to achieve precise control of the pressure in the
system. In conjunction with other control devices, such as flow
regulating valves, precise regulation and control of pressure in
complex industrial processes can be achieved.
5. plays an important role in the safety system. For example, in
steam boiler systems, pressure controllers can be used to monitor
and control steam pressure to ensure safe and stable system
operation.
Applications of Electronic Pressure Switch:Measurement and control of pressure/differential pressure of fluid
media in industries such as hydropower, metallurgy, and chemical
engineering, for automatic control applications.
| Performance Parameters |
| Measurement Range | 0-10KPa~2MPa(Differential Pressure) |
| Pressure Type | Differential Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Long-Term Stability | ±0.3%F.S/year |
| Zero Point Temperature Drift | ±0.03%F.S/ºC(≤100KPa) ±0.02%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.03%F.S/ºC(≤100KPa) ±0.02%F.S/ºC(>100KPa) |
| Compensation Temperature | 0-50ºC(0-10KPa, 0-20KPa) ,0-70ºC ,-10-70ºC |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Housing Material | 1Cr18Ni9Ti |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Relay Control | 1-2 channels of control or electronic switch quantity control |
| Contact Life | Exceeds 100,000 cycles |
| Display Range | -1999~9999 |
| Installation Method | vertical axis installation |
| Explosion-proof Rating | Intrinsically Safe |
| Protection Rating | IP65 |
| Weight | ~0.65kg |
| Outline Construction |
| Dimension |  |
Ordering tips:
1. When selecting the product, please ensure that the measured
medium is compatible with the contacting parts of the product.
2. When placing an order, please specify the power supply, accuracy
grade, number of control points, and whether it comes with an RS485
interface.
3. The measurement range of the flat diaphragm pressure controller
is 0~35KPa...20MPa.
4. For users selecting differential pressure measurement, pay
attention to the relationship between the differential pressure
range and the allowable overpressure and maximum pressure of the
high and low pressure chambers, and ensure it aligns with the
requirements of the field application. To ensure the safe and
reliable operation of the product, it is recommended to install a
three-valve manifold between the measuring point and the
transmitter.
5. To ensure the reliable operation of the product, it is
recommended to install lightning protection devices at the site and
ensure that the product and power supply are reliably grounded. For
special requirements such as strong vibration, instantaneous impact
force, strong electromagnetic interference, and radio frequency
interference, please inform our company and specify them in the
order.
Q&A:
1.Q: What are the features of your pressure sensor transmitters?
A: High precision, durability, and excellent performance.
Customization available.2.Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service3.Q: What is your production capacity?
A: Our manufacturing facilities can produce up to 30,000 pressure
sensor transmitters per month, so we are fully capable of meeting
the needs of large-scale orders. However, it is advisable to
contact our sales team in advance to ensure smooth production and
delivery scheduling
.4.Q: What's the typical delivery period?
A: 5~8 working day for standard models. Customized products may
vary.5.Q: How are the products priced? Any discounts?
A: Competitive pricing with discounts for bulk orders or long-term
partners
.6.Q: What is the warranty of your products? And after-sales
service?
A: Our warranty time is 24 months after shipment, and our
after-sales will respond with your questions in 24hrs, remote
instruction by PC network is always available.
