G1/4, 1/4NPT 4-20mA Pipe Differential Pressure Transmitter BP93420DII Differential Pressure Transmitter
Introduction of differential pressure transmitter:
BP93420DII differential pressure transmitter uses piezo-resistive
silicon technology, low cost differential pressure sensor uses
silicon differential pressure sensors with stainless steel isolated
diaphragm as measuring elements. Made of 316L stainless steel and
designed of rigid and robust construction, low cost differential
pressure sensor has a feature of that zero point and full range can
be adjusted. It is suitable for application in harsh environment
and measurement with corrosive pressure media.This product has
widely been used for measurement of differential pressure of
pipeline fluids in petroleum industry, chemical industry, electric
power hydrology etc.
Product Features of differential pressure transmitter:
1. The transmitter features a stainless steel structural design,
making it compact and easy to install
2. It undergoes strict temperature compensation and aging
screening, ensuring stable and reliable performances
3. The electrical interface can be selected as a plug-in or direct
wiring option.
Applications of differential pressure transmitter:
1.Industrial Process testing and control
2.Level measurement and control
3.Available to Oxygen, CO2, Nitrogen,gas steam
4.Pipeline pressure testing
| Performance Parameters |
| Measurement Range | 0-10KPa...~2MPa |
| Pressure Type | Differential Pressure |
| Single-side Overload | ≤3 times of the rated range |
| Static pressure | The minimum value between 5 times the rated range or 7 MPa |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability | ±0.03% (Typ.) ±0.05%FS (Max.) |
| Hysteresis | ±0.03% (Typ.) ±0.05%FS (Max.) |
| Long-Term Stability | ±0.5%F.S/Year(≤200KPa) ±0.2%F.S/Year(>200KPa) |
| Zero Temperature Drift | ±0.01%FS/ºC(>100KPa), ±0.02%FS/ºC (≤100Kpa) |
| Span Temperature Drift | ±0.01%FS/ºC(>100KPa), ±0.02%FS/ºC (≤100Kpa) |
| Compensation Temperature | 0-50ºC(0-10KPa, 0-20KPa) ,0-70ºC ,-10-70ºC |
| Operating Temperature | -30ºC~80ºC |
| Storage Temperature | -40ºC~100ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Intrinsically safe and explosion-proof |
| Protection Rating | IP65 |
| Weight | ~0.45kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0.5~4.5V | 5VDC |
1. When selecting the product, please ensure that the measured
medium is compatible with the product's contacting parts.
2. To ensure reliable operation, it is recommended to install a
three-valve manifold between the measurement point and the
transmitter, ensuring a slow and uniform pressure application to
the positive and negative pressure chambers of the transmitter.
3. During installation, it is advisable to position the pressure
interfaces at both ends horizontally to minimize the impact of the
installation location on the product.
4. For special requirements such as strong vibration, instant
impact force, strong electromagnetic interference, or radio
frequency interference, please inform our company and specify these
requirements in the order
| Order Guide |
| BP93420XX | Pressure Transmitter |
| Code | Outline Construction |
| DII | Differential Pressure Transmitter |
| Measurement Range | 0-10KPa...~2MPa |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 Male |
| J2 | G1/2 Male |
| J3 | G1/4 Male |
| J4 | 1/2 NPT Male |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | Other |
| Code | Pressure Type |
| D | Differential Pressure |
FAQ:
Q:How long will you reply me?
A:We will contact you as soon as possible but within 12 hours
Q: Can I get some samples?
A: Yes, Sample order is available for quality check and market
test. But you have to pay the express cost.
Q: How soon can you arrange your production?
A: Once getting your product confirmation and receiving the
prepayment, the production will be started immediately.
Q: What''s delivery time?
A: It usually takes about 3-5 working days for small order and
10-15 days for big order.
Q: What certificates do you have ?
A:ISO9000, CE, Explosion-proof certification, RoHs ready. And
before the delievry of goods, quality and safety inspection
certification issued by third parts also can be offered.
Q: What''s your warranty terms?
A: We offer 24 months warranty time.
Q:Can you provide OEM & Customized service?
A:Yes, OEM and ODM are both available, we have the professional
R&D dept which can provide professional solutions for you.
