HT30 Silicon Piezoresistive Pressure Sensor
Introduction of silicon pressure sensor:
HT30 silicon piezoresistive pressure sensor is a highly stable
diffused silicon element. It utilizes the piezoresistive effect of diffused silicon
to measure the pressure of liquids and gases. The core is welded together with a
standard thread, and it does not use O-ring sealing, making it suitable for
a wide range of applications
Product Features of silicon pressure sensor:
1.Utilizing advanced technology and 316L stainless steel housing,
along with materials such as titanium and Hastelloy for the diaphragm
2.Employing thick-film circuits for temperature compensation and
zero-point correction.
3.Multiple thread interfaces available for selection
4.Welded as one piece, compact size, and high reliability
Applications of silicon pressure sensor:1.Applied in various industrial process sites, including petroleum,
chemical, metallurgy, power, and hydrology .
2.Used in marine and aviation industries
3.Suitable for hydraulic and pneumatic control systems
4.Utilized in process control applications
Electrical performance of silicon pressure sensor:1.Power Supply: ≤2mA DC (Typical 1.5mA DC)
2.Input Impedance:2.5KΩ~6KΩ
3.Output Impedance:2.5KΩ~6KΩ
4.Electrical Connection:Gold-plated Kovar pins or 100mm
high-temperature wires.
| Performance Parameters of silicon pressure sensor: |
| Measurement Range | Gauge(G) | 10KPa,20KPa,35KPa,100KPa,200KPa,350KPa,1000KPa,2000Kpa |
| Absolute(A) | 100KPaA,200KPaA,350KPaA,700KPaA,1000KPaA,2000KPaA |
| Sealed(S) | 3500KPaS,7MPaS,10MPaS,20MPaS |
| Typ | Max | Unit |
| NonLinearity | ±0.15 | ±0.3 | %F.S |
| Repeatability | 0.05 | 0.1 | %F.S |
| Hysteresis | 0.05 | 0.1 | %F.S |
| Zero Offset Output | 0±1 | 0±2 | mV |
| Full Scale Output | ≤20KPa | 50±10 | 50±30 | mV |
| ≥35kPa | 100±10 | 100±30 | mV |
| Zero Offset Temp. Drift | ≤20KPa | ±1 | ±2 | %F.S |
| ≥35kPa | ±0.5 | ±1 | %F.S |
| Full Scale Temp. Drift | ≤20KPa | ±1 | ±2 | %F.S |
| ≥35kPa | ±0.5 | ±1 | %F.S |
| Compensated Temp. | ≤20KPa | 0~50 | ºC |
| ≥35kPa | 0~70 | ºC |
| Operating Temperature | -20~80 | ºC |
| Storage Temperature | -40~125 | ºC |
| Allowable Overload | Take the smaller value between 3 times the full scale or 120MPa | |
| Burst Pressure | 5X the full scale | |
| Long-term Stability | 0.2 % | F.S/Year |
| Diaphragm Material | 316L | |
| Insulation Resistance | ≥200MΩ 100VDC | |
| Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | |
| Shock | 100g,11ms | |
| Response Time | ≤1ms | |
| O-ring Seal | Nitrile rubber or Fluoro rubber | |
| Filling Medium | Silicon Oil | |
| Weight | ~63g | |
| The parameters are tested under the following conditions: 1.5mA @ 25°C |
