BPHT24 Pressure Transmitter
Introduction of flush diaphragm pressure sensor :
BPHT24 flush diaphragm pressure sensor transmitter uses a flat
membrane structure. The pressure transmitter uses a corrugated
membrane to directly feel the pressure. The sensor's flat diaphragm
prevents fouling, unsanitary and sticky liquid clogging. It has the
characteristics of small size, light weight and good long-term
stability, and is widely used in food, medicine, health and wine
industry.
Flush membrane type pressure sensor elastomer adopts imported
material, diaphragm isolation technology, test head without
pressure hole, integrated structure design, there is no viscous
medium blockage in the measurement process.
Product Features of flush diaphragm pressure sensor:
1. Various pressure interface options
2. Designed for hygienic applications to prevent medium scaling
3. High accuracy with a fully stainless steel structure
4. Easy to clean
Applications of flush diaphragm pressure sensor:
1. Suitable for measuring non-corrosive gases and liquids with
316L.
2. Ideal for environmental protection and chemical industries.
3. Used in the marine and aviation industries.
4. Well-suited for use in the medical, biopharmaceutical, and food
hygiene industries.
| Performance Parameters of flush diaphragm pressure sensor |
| Measurement Range | 0~35Kpa…~20MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability& Hysteresis | 0.02%F.S(Typ.) 0.05%F.S(Max.) |
| Long-Term Stability | ±0.1%F.S/Year(Typ.) ±0.2%F.S/Year(Max.) |
| Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Frequency Response | 2.4Khz |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex db IIC T6 Gb |
| Protection Rating | IP65 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~0.15kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0/1~10V |
| 0.5~4.5V | 5VDC |
| RS485 Communication Protocol | 3.6~30V / Battery | 4 wire |
1. When selecting the product, please ensure that the tested medium
is compatible with the contact part of the product.
2. When placing an order, please note that explosion-proof products
do not include digital display heads.
3. When ordering a transmitter with LCD or LED display head, the
power supply of the transmitter should not be less than 20VDC.
4. To ensure the reliable operation of the product, it is
recommended that the user in the field installation of lightning
protection devices, and to ensure that products and power supply
reliable grounding.
5. The rated operating temperature range of fluorine rubber O-ring
is -20℃~ 250℃.When the product operating temperature is lower than
-20℃, it is necessary to choose EPDM O-type seal ring.
6. The default cable length is 1.5m and there are three kinds of
materials to choose from. If there are no special instructions,
polyethylene cable materials can be used.If you require a different
cable material, please indicate it in the order.
7. In case of special requirements such as strong vibration,
instantaneous impact force, strong electromagnetic or RF
interference, please inform us and indicate in the order.
| Order Guide of flush diaphragm pressure sensor |
| BPHT24 | Pressure Transmitter |
| Code | Outline Construction |
| IX | Display Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter |
| T | High-temperature resistant Pressure Transmitter | | |
| Measurement Range | 0~35Kpa…~20MPa |
| (0-X)Kpa or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | 2088 Industrial Casing |
| B5 | 2088 Industrial Casing with Display |
| B6 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
FAQ:Q&A
Q1:Areyou manufactrade company?
A1:We are manufactrader with more than 29 years of experience.
Q2:Customized Product
A2:We provide OEM and Custom-Design services.
Q3:Quality Quarantee
A3:Our products have a limited 12 to 18 months warranty from
shipment date to the original purchaser.Hengtong will replace or
repair defective products free of charge.This warranty does not
apply to any units have been modified,misused,neglected.
Q4:Shipment&packing
A4:Products are generally shipped by international Express
including UPS,FedEx,DHL and INT for freight prepaid,also can use
your shipment account to collect,Standard export packing,including
inspection certification.
Q5:Contact US
A5:We have an active and experienced sales team to serve you on
technical question and business issue.Just leave us message or
click the Online Service.
