Description
The 1000-6000 MHz C Band Power Amplifier is a specialized device
designed to amplify radio frequency (RF) signals within the C band,
covering the frequency range from 1000 megahertz (MHz) to 6000 MHz.
Here's a detailed introduction to this power amplifier:
Frequency Range: The C band is an important part of the RF spectrum, typically
ranging from 4 gigahertz (GHz) to 8 GHz. This amplifier
specifically covers the frequency range from 1000 MHz to 6000 MHz
within the C band. The C band finds extensive applications in
communication, radar, and satellite communication systems.
Power Output: This amplifier is capable of amplifying input RF signals to
higher power levels, suitable for applications that require strong
signal transmission or testing. The specific output power can vary
based on the amplifier's design and requirements.
Applications: C band power amplifiers are commonly used in wireless
communication systems, radar systems, satellite communications,
broadcasting, and radio spectrum analysis. They play a crucial role
in signal amplification and transmission in these fields.
Stability and Reliability: These amplifiers are typically designed for stability and
reliability, capable of long-term operation in various
environmental conditions while maintaining consistent performance.
This is essential for ensuring signal quality and system stability.
Design Features: The design features of C band power amplifiers include a wide
frequency range, appropriate power output, good signal
amplification and transmission performance, and compatibility with
other equipment and systems.
In summary, the 1000-6000 MHz C Band Power Amplifier is a vital
equipment operating within the C band frequency range, serving
various RF applications with its high power output, stability, and
reliability. It plays a significant role in meeting the demanding
requirements of signal amplification and transmission in RF
systems.
Specification
Typical performance at 220V AC +25oC, and in a 50Ω system.
| RF / ELECTRICAL |
| PARAMETER | MIN | TYP. | MAX | UNIT |
| Operating Frequency | 1000 | | 6000 | MHz |
| RF INPUT | | 0 | 5 | dBm |
| Power Gain | | 46 | | dB |
| P-sat Output Power | | 40 | | W |
| Power Gain Flatness | | ±4 | | dB |
| In/Out Impedance | | 50 | | Ω |
| Spurious Signals | | | -65 | dBc |
| Harmonic Signals | | -15 | -10 | dBc |
| Gain Adjust Range | | 31.5 | | dB |
| Gain Adjust Step | | 0.5 | | dB |
| Operating Voltage | 200 | 220 | 240 | V AC |
| Supply Power | | | 800 | W |
| Input VSWR | | | 2 | |
| MECHANICAL |
| PARAMETER | VALUE | UNIT |
| Dimensions (W x D x H) | The standard 19-inch shelf is 5U high, 482*600*223 | mm |
| RF Connectors (Input / Output) | N-K / N-K (N female) | -- |
| Control Connector (Option1) | DB9:Power on/power off control, gain control; Monitoring parameters
include output power, temperature, supply voltage, and supply
current | -- |
| Control Connector (Option2) | RJ45:Remote control and monitoring can be realized through LAN | |
| Cooling | Built-in cooling system, forced air cooling | -- |
| Weight | ≤25 | kg |
| AC Connector | Three-in-one air switch | |
| ENVIRONMENTAL / PROTECTIONS |
| PARAMETER | MIN | MAX | UNIT |
| Operating Temp. | -25 | +55 | °C |
| Humidity Range | 0-90 | % |
| Amplifier Safeguard Temp. | +80 | °C |
| Protections | With over temperature protection, input over power protection, over
voltage protection, over current protection, output mismatch
protection | |
| INPUT/OUTPUT panel Connector |
| AMPLIFIER CONNECTOR TYPE: | —— |
| TRIAD CABLE PART NUMBER: | —— |
| NUMBER | interface type | DESCRIPTION |
| X1 | N-FK | RF IN |
| X2 | N-FK | RF OUT |
| X3 | LCD display | Human-computer interaction interface |
| X4 | Three-in-one air switch | AC/220V/50Hz |
| X5 | RJ45 | LAN |
| X6 | DB9 | Control interface |
| X7 | N-FK | Forward coupling port |
| X8 | N-FK | Reverse coupling port |
| Connector Definition |
| AMPLIFIER CONNECTOR TYPE: | DB9 |
| TRIAD CABLE PART NUMBER: | —— |
| NUMBER | Definition | DESCRIPTION |
| 1 | PA Enable | TTL Hi= Enable, TTL Lo = Disable or No Connection |
| 2 | Output Power monitoring | Output Power Detection (TTL Hi= Normal , TTL Lo =Fault ) |
| 3 | Temp monitoring | Temp monitoring alarm (TTL Hi= Normal , TTL Lo =Fault ) |
| 4 | Voltage monitoring | Voltage monitoring alarm (TTL Hi= Normal , TTL Lo =Fault ) |
| 5 | Current monitoring | Current monitoring alarm (TTL Hi= Normal , TTL Lo =Fault ) |
| 6 | RXD | RS232 serial bus interface, PA gain adjustment |
| 7 | TXD |
| 8 | GND |
| 9 | NC | NC |
Our Company
Shinewave Technology Co., Ltd, Nanjing is a company specializing in
the research and development, production and sales of RF microwave
passive components and subsystems. The company's product field
covers a variety of microwave communication devices, including RF
power amplifier, RF microwave filters, horn /Microstrip Antenna,
isolators & Circulators, which are widely used in cellular
wireless, aerospace, satellite, Mil-Spec, CATV/Broadband, RFID,
test instrumentation, diagnostic imaging and many more fields
worldwide.
In order to meet the special requirements of customers, in addition
to standard products, we provide customized production solutions.
With experienced experts and specialists, our company has
comprehensive production and strong design capabilities.
Wholeheartedly, we provide customers with high-quality products and
on time delivery services.
As a result of our high quality products and outstanding customer
service, we have gained a global sales network reaching Britain,
America, Japan, Italy and south East Asia. If you are interested in
any of our products or would like to discuss a custom order, please
feel free to contact us. We are looking forward to forming
successful business relationships with new clients around the world
in the near future.
Participation in exhibitions
Why choose us
Staffing
Over ten years' OEM/ODM experience.
R&D team with doctor,master degree talents.
Products covers a wide range of applications.
TECHNICAL SUPPORT
Fast Response
Provide Project Technical AdviceTo Provide Customers With Quality
Pre-Sales/Post-Sales Service
PRODUCT SUPPLY
Full Spectrum Products Available
Customer Needs As A Guide
To Provide Customers With Customized Products And Solutions
PRODUCT QUALITY
All Have Passed Various Performance Tests Before DeliveryTo Ensure
That The Product is Good And Stable During Use
Certifications
Packing&Shipping
FAQ
Q1. Could I get a sample before bulk order?
Yes, we offer the sample for all models but charged.
Q2. What should I do if I don't know about frequency in my country?
Please feel free to contact us with your inquiry, we will find the
frequency you need and offer help to your problems.
Q3. Do you accept OEM/ODM order?
Yes, we can customize the brand logo, colors, and frequencies.
Q4.Shipment Date
| Sample | 20 business days |
| ≤50 pcs | 60 business days |
| >50 pcs | 90 business days |
| >200 pcs | Negotiate |
Q5: Delivery Date of the sample by DHL/FedEx
| USA/Canada/Europe/Asia | 3-5 days |
| Middle East/Latin American | 5-7 days |
| African | 3-7 days |
