Parallel Fixed Metal Pipe Connectors Joint System Bracket ISO9001

Parallel fixed lean pipe fittings pipe joint system bracket

Product Introduction

The parallel fixed metal joint only need one pair of M6 * 25 bolts to complete the installation process. Unlike W-9A, both sides of W-13 are fixed, and the lean pipe cannot rotate between the joints. Therefore, the combination of W -13 and lean tube can play a role in fixing the structure and increasing the bearing capacity in the lean pipe racking. After the joint is grinded, the burr on the joint surface can be greatly reduced or even completely cleared, effectively reducing the risk of injury to workers in the workplace. And the surface treatment of the joint adopts electroplating, which can effectively prevent its rusting and prolong the service life of the joint.

Features

1. Two equipotential lines on both sides of the product, so the installation position of the tube can be known when using. Auxiliary user installation.

2.The thickness of the product is up to 2.5, 25% thicker than most products, with stronger performance and higher bearing capacity.

3. Holes are reserved on the surface of the product, and self-tapping screws can be inserted later to better fix the pipe.

4. Products can be customized with logos and marked with models according to different needs of customers.

Application

LiefTech paralle fixed metal joint is used for the angle structure formed by two pipes to strengthen the whole racking. It can play a role in increasing the bearing capacity in the lean pipe racking. A set of M6 bolts is required. The groove on the joint surface can increase the friction between the joint and the pipe, making it more stable. Moreover, the connection between the connector and the lean pipe conforms to human mechanics. Parallel single-side swivel metal joint is often used in various material racks and turnover vehicles .