Product Description:
The TS-M316G-2SFP product is a managed Ethernet switch which provides 16 port
10/100/1000Base-TX and 2x1000Base-X SFP ports. This switch is ideal
for those who need control over their network and the complexity of
implementing a full Layer 2 management without the cost. It is also
suitable for deploying access points, VoIP phones and IP-based
surveillance camera systems.
The TS-M316G-2SFP bridges the gap between unmanaged and fully
managed switches with its intuitive Web based management tool,
allowing quick and easy deployment and configuration. This helps to
cut down on set-up times and costs of having to hire technicians
for the job. Furthermore, being Web Smart, the switch contains a
powerful collection of features including port-based VLANs, secure
network, rate limiting, port-mirroring, and spanning tree.
Features:
This product is a 16-port 10/100/1000Base-T RJ45 cable that
supports basic management, setup, web smart management, and
bandwidth management. It also offers SNMP v1/v2/v3 management as
well as loop protection, automatic recovery and IGMP snooping.
Additionally, it contains a 2-port 100/1000BASE-X mini-GBIC/SFP
option.
Web smart management is designed to be simple and easy to use. It
allows for the adjustment of bandwidth based on port input and
output. Furthermore, it has an integrated interface for the
management and setup of the device through an RJ45 console.
This product is also capable of advanced management with its SNMP
v1/v2/v3 capability. With it, you can manage your device remotely,
as well as monitor the status of your network in real time. With
its loop protection, automatic recovery and IGMP Snooping
capabilities, it provides protection against major loop threats
while keeping your network stable with minimal effort.
Technical Parameters:
| RJ45 port and speed | 16x10/100/1000Base-TX |
| Fiber port and speed | 2x100/1000Base-FX SFP (Dual Mode, Auto Detection) |
| Ethernet standards | IEEE 802.3
IEEE 802.3u 100BASE-TX
IEEE 802.3ab1000BASE-T
IEEE 802.3x
IEEE 802.3z 1000BASE-X
IEEE 802.3ad
IEEE 802.3q, IEEE 802.3q/p
IEEE 802.1w, IEEE 802.1d, IEEE 802.1S
STP (Spanning Tree Protocol)
RSTP/MSTP (Rapid Spanning Tree Protocol)
ERPS ring network protocol |
| MAC address table | 8K |
| Transmission mode | Store and Forward (full/half duplex mode) |
| Exchange property | Delay time: < 7μs
Backplane bandwidth: 56Gbps |
| Power | Built-in power AC 100~240V 50/60Hz |
| Protection grade | IP30 |
| Dimensions | 440mm x 190mm x 44.5mm (L x W x H) |
| Installation mode | Rack Mounting |
| Weight | 3000g |
| Operating Temperature | 0℃~55℃ |
| Storage Temperature | -40℃~75℃ |
| Defects Liability Period | 1 year warranty, lifetime technical support |
| Software Features | Redundant network: STP, RSTP, EAPS/ERPS |
| Multicast: IGMP Snooping V1/V2/V3, GMRP |
Support port-based VLAN
Up to 4096 VLANs
Support Voice VLAN |
802.1p port queue priority algorithm
Cos/Tos, QOS remark
WRR (Weighted Round Robin), weighted priority rotation algorithm
WRR, SP, priority scheduling modes |
WEB interface management
CLI management based on Telnet, TFTIP, Console
SNMP V1/V2/V3 management |
| Support many-to-one port mirroring |
| DHCP Snooping |
| Security DHCP Snooping, Option 82, 802.1X, User hierarchical
management, ACL, DDOS, port based MAC filtering / binding |
Half duplex based on Back pressure;
Full duplex based on PAUSE frame |
Support and Services:
Ethernet Switch Technical Support and Service
Our technical support and service team for Ethernet switches
provides high quality and comprehensive support and services to
ensure the smooth operation of your network.
- Installation and configuration support
- Troubleshooting support
- Network security setup and optimization
- Maintenance and update services
- Network monitoring services
- On-site support and maintenance
We are committed to providing you with the best support and
services for your network. Contact us today to find out more about
our Ethernet Switch technical support and service.
Packing and Shipping:
Ethernet Switch Packaging and Shipping
When shipping an Ethernet switch, it is important to carefully
package the device to ensure it arrives safely and in working
condition. There are several steps to properly package and ship an
Ethernet switch.
Step 1: Check for Damage
Before packaging your Ethernet switch, it is important to check for
any signs of damage. If there is any existing damage to the device,
make sure to inform the shipping carrier about it.
Step 2: Prepare the Box
Choose a box that is large enough to fit the Ethernet switch and
any accessories. Wrap the box in bubble wrap or some other
protective material to ensure the device is protected during
shipment.
Step 3: Insert the Device
Place the Ethernet switch and any accessories in the box and fill
any remaining space with packing materials. Make sure to place the
device in an upright position to ensure it does not move around
during shipment.
Step 4: Seal the Box
Once the box is ready to be shipped, securely seal it with
packaging tape. Make sure all flaps of the box are closed and the
tape is firmly secured.
Step 5: Label the Box
Label the box with the intended recipient's name and address. If
the box is being shipped through a courier service, attach a
shipping label with the required information.
Ordering Information:
| Model | Description |
| TS-M316G-2SFP | L2+ 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Ethernet
Switch |
| Mounting Options | ► Desktop or Rack Mounting Installation |
| SFP Options | ► SFP option. Please select your SFP on our SFP Options Page |
| ► SFP module is to be purchased separately. |
