Technical parameters
| NO. |
Model | Pouring pot size mm | Mixing bowl |
Vacuum unit(a) | Vacuum unit(a) |
Working pressure |
Measurement |
Control mode |
| 1 | KCJ-300-2400 | 2400X3000 | 2X300L | SV300B/ZJY-300 | SV300B | Pnsttve gressure | Static mixing |
Touch screen |
| 2 | KCJ-400-2400 | 2400X3000 | 2X400L | SV300B/ZJY-300 | SV300B |
Posiive pressure |
Static mixing |
Touch screen |
| 3 | KCJ-400-2600 | 2600X3000 | 2X400L | SV300B/ZJY-300 | SV300B |
Posiive pressure |
Static mixing |
Touch screen |
| 4 | KCJ-400-3000 | 2000X3500 | 2X400L | 2XSV300B/ZJY-300 | SV300B |
Posiive pressure |
Static mixing |
Touch screen |
| 5 | KCJ-400-3200 | 3200X4000 | 2X400L | 2XSV300B/ZJY-600 | SV300B |
Positive pressure |
etatic mixing |
Touch screen |
My Company Service:
My factory is a high-tech private enterprise, it has a experienced
term, which more than ten years engaged in research and
development, design, manufacture and installation of vacuum
equipment. Besides, it is not only committed to build high quality
brand about vacuum equipment, but it also has prodcuts, which are
widely used in impregnating, epoxy resin pouring, drying, and note
oil processing in some industries(like metal heat treatment,
transformer, and transformer device, reactor device, reg- ulator
device, high pressure electrical, motor, capacitor, switch and
other similar industries).
Relying on strong technical advantages and scale advantages, and it
also dedicated itslef to develop Vacuum application technology and
relative vacuum equipment Main products are differnent kinds of
vacuum casting equipments, vacuum drying equipment, vacuum
impregnation equipment, vacuum oiling device equipment, and vacuum
heat treatment equipment.
The most important of this company is product qualitu, and it
strictly follows international quality certification system,
implmentcation od quality poliy about'creating a Kerry brands,
buliding first-class equipment, following innovation for
development, and being in accordance with customer service.It also
provides the best solution, higher quality products and more
valuable and efficient after-sales service for
new and old customers.
Service mode:
1. ‘Turn-key projects,' which is a one-step service included
design, fabrication, installation, commissioning, trial production
and training.
2. To accept the user's special requirements, development of
dedicated, special non-standard vacuum equipment.
3. Technological transformation and maintenance services of vacuum
equipment at home and aboard.
4. To provide customers with technical advice.
5. Domestic and foreign well-known vacuum products agent.
