Masima Patient Cable LNC MP10 Cable 2281 MP Series Patient Cables
Masima Patient Cable LNC MP10 Cable 2281 MP Series Patient Cables
In good working condition
►Brief Introduction
The LNC MP Series Patient Cables and Masima Sensors are indicated
for the continuous noninvasive monitoring of functional oxygen
saturation of arterial hemoglobin (SpO2) and pulse rate (measured
by an SpO2 sensor) for use with adult, pediatric, infant, and
neonatal patients in hospitals, hospital-type facilities, mobile,
and home environments.
► Features
• Ensure the cable is physically intact, with no broken or frayed
wires or damaged parts. Visually inspect the cable and discard if
cracks or discoloration are found.
• All sensors and cables are designed for use with specific
monitors. Verify the compatibility of the monitor, cable and sensor
before use, otherwise degraded performance and/or patient injury
can result.
• Carefully route patient cable to reduce the possibility of
patient entanglement or strangulation.
• Failure to properly connect the sensor or the oximeter module to
the cable will result in intermittent readings, inaccurate results,
or no reading.
• To avoid damage to the cable, always hold it by the connector
rather than the cable when connecting or disconnecting either end.
• To prevent damage, do not soak or immerse the sensor or cable in
any liquid solution. Do not attempt to sterilize the cable or
sensor.
• Do not attempt to reprocess, recondition or recycle Masima
patient cables as these processes may damage the electrical
components, potentially leading to patient harm
► Instructions
A. Attaching LNC MP Patient Cables to the Device
Orient the connector of the cable to mate with the patient cable
connector on the SpO2 Module (Fig. 1a) or the MMS (Fig. 1b).
B. Attaching the LNC MP Patient Cable to a LNCS Sensor
1. Refer to Fig. 2. Insert the Sensor cable connector completely
into the LNC MP Patient Cable.
2. Refer to Fig. 3. Completely close the protective cover.
C. Disconnecting the LNC MP Patient Cable from a LNCS Sensor
1. Refer to Fig. 4. Lift the protective cover to gain access to the
sensor connector.
2. Refer to Fig. 5. Pull firmly on the sensor connector to remove
from the patient cable.
► Quick Details
| Brand | Masima |
| Type | LNC MP10 2281 |
| Warranty | 90 Days |
| Shipping Date | 3-5 Working Days |
| Application | Hospital Devices; Medical Care; ICU; Medical Equipments and
Accessories |
► Warm Tips
In order to avoid causing unnecessary trouble, please read the
following carefully.
Please look through all the pictures with patience before placing
orders to confirm the product is exactly you want or not as they
are also an important part of the product description. What’s more,
it is buyer’s responsibility to pay for all the customs fees
including all taxes and duties. So it is of great necessity for you
to make certain that the equipment you are ordering can be imported
in to your country. Once the package leaves our factory, the
shipper is not responsible for any delays any more. So please keep
it in mind that be sure to check out all the relevant information
before placing your orders.
If you have any questions about Masima Patient Cable LNC MP10 Cable 2281 MP Series Patient Cables, please feel free to contact us at any time, we are glad to answer
them. Looking forward to receiving your early inquiry. Thanks for
Your Cooperation.
