Heat Resistant 316L Stainless Steel Square Tube for Ship Building
316L is a stainless steel with molybdenum. Because the steel
contains molybdenum, the overall performance of this steel is
better than 310 and 304 stainless steel. Under high temperature
conditions, when the concentration of sulfuric acid is lower than
15% and higher than 85%, 316L stainless steel has a wide range of
use. 316L stainless steel also has good chloride corrosion
properties, so it is usually used in marine environments.
Chemical Composition:
| Unit | C | Si | Mn | S | P | Cr | Ni | Mo |
| <=% | 0.08 | 1.00 | 2.00 | 0.03 | 0.035 | 16-18.5 | 10-14 | 2.00-3.00 |
Machine Capability:
| Yield strength (N/mm2) | Tensile strength (N/mm2Mpa) | Elongation | Hardness |
| >=177 | >=480 | >=40 |
HB <=187 HRB <=90
|
1. Material:
Carbon Steel:Q235,Q195,Q345,etc
200 series:201 202
300 series :301 304 304L 309S 310S 316L 317L 321 904L
400 series :409L 410 420 430 439 441
2. Size:
Length:1-12m
Edge Width: 10-800mm or as customer required
We have a professional processing factory to cut stainless steel
sheets.
3. Surface:
2B BA NO.4 Mirror 8K pvc coated.
Surface Classification and Processing:
N0.1-After hot rolling, it is heat treated and pickled.
2B-After cold rolling, heat treatment, pickling or similar
treatment is carried out, and finally it is smoothed to obtain
proper gloss.
2D-After cold rolling, heat treatment, pickling or similar
treatment or matt surface.
3# 100~200# The product is ground with grinding belt.
4# 150~180# The product is ground with grinding belt.
HL Grinding material with appropriate grain size is polished to
make the surface continuously abrasive.
You could also ask for other special treatment.We have a stainless
steel processing factory in Wuxi.
4. Standard:
GB JIS ASTM EN DIN AISI
5. Packing:
Standard stainless steel shipping packaging or as customer required.
