360 bar Save Energy High Pressure Solenoid Valve 3/4'' 12V 24V 110V 220V
This is a high pressure solenoid valve, 1/4'' to 1'' female threaded port, 10mm to 25mm orifice size, 2 way normally closed, piston pilot operated, 360 bar max working pressure, stainless steel body, PTFE or PEEK seal, various voltages for your choice, such as 12VDC, 24VDC, 24VAC, 110VAC and 220VAC, etc. It is used for a wide arrange of industrial applications to control fluids.
Product Features:
1. Working Medium: Water, Air, Gas, Oil, Liquid, etc
2. Max Working Pressure: 360 bar (See the parameter table below for details)
3. Body Material: Stainless Steel
4. Seal Material: PTFE, PEEK
5. Port Size: 1/4'', 3/8'', 1/2'', 3/4'', 1''
6. Orifice Size: 10mm, 15mm, 20mm, 25mm
7. Function: 2 Way Normally Closed
8. Voltage: 12VDC, 24VDC, 24VAC, 110VAC, 220VAC (50/60Hz)
Technical Data:
Main Dimension:
Our Porduction:
FAQ:
Question 1: What is a solenoid valve used for?
Answer 1: A solenoid valve is used to open, close, mix, or divert media in an application. They are used in a wide variety of applications.
Question 2: How can you tell if your solenoid is bad?
Answer 2: If the solenoid valve fails to open or close, is partially open, makes a humming noise or has a burned-out coil, you need to troubleshoot the valve solenoids.
Question 3: How do I choose a solenoid valve?
Answer 3: When choosing a solenoid valve, it is important to know your media. Depending upon the media and flow requirement, choose the material, orifice size, temperature, pressure, voltage, response time and certification required for your application.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
