Epoxy Fiberglass Reinforced Pipe For Live Line Tools
Product
The feature of fiberglasstube for Epoxy Fiberglass Reinforced Pipe
For Live Line Tools
Fiberglass tubes is a commonly used material for protecting cables
and pipelines, which has good electrical insulation performance and
corrosion resistance. This article will introduce the process of
fiberglass esophagus, including raw material preparation,
preparation process, heat curing, and packaging.
Preparation of raw materials
1. Glass fiber: Glass fiber is the main raw material for preparing
glass fiber sleeves, which has high strength and corrosion
resistance. During the preparation process, it is necessary to
select suitable glass fibers and perform cutting and pre-treatment
as needed.
2. Resin: Resin is the adhesive for fiberglass casing, commonly
used include epoxy resin, polyester resin, etc. The resin needs to
be mixed in a certain ratio to ensure that the cured fiberglass
casing has good physical properties.
3. Additives: Additives are materials that play an auxiliary role
in the preparation process, commonly including leveling agents,
diluents, etc. The selection of additives needs to be determined
based on specific process requirements and target performance
No. | Description | Unit | Value |
1 | Density | g/cm3 | ≥ 2.2 |
2. | Water absorption rate | % | ≤ 0.05 |
3 | Dielectric dissipation factor at 50HZ |
| ≤ 0.0057 |
4 | Penetration Test |
| Non-penetration |
5 | Dielectric tests before and after exposure to humidity | Tests before exposure to humidity | µA | ≤5.1 |
Tests after exposure to Humidity | µA | ≤8.1 |
6 | Dielectric wet test |
| No flashover no sparkover or puncture: No visual sign of tracking or erosion on the surface ,both internal
and external; No perceptible temperature rise |
7 | Bending Test(Ø32mm) | mm | Deflection:f≤19.22 |
| Proportion of Residual deflection to deflection measured during
application of the force: Fd:≤0.41 |
N | Breacking Load:≥ 2635 |
% | The deflection variation under the same load in different
directionsΔf:≤1.95 |
8 | Torsion Test(Ø32mm) |
| Angle deflection ad<17.6 |
N.m | Breacking Torsion:87.9 |
9 | Crushing Test(Ø32mm) | N | Min value where the first discontinuity of the curve occurs
Fd>1771 |
N | Max value during the first 3 min Fr>2785 |
10 | Mechanical fatigue tests | 4000times bending cycles test |
| No visible damage,no permanet set. |
Dielectric tests before exposure to fumidity | µA | ≤5.0 |
Dielectric tests after exposure to humidity | µA | ≤8.2 |
11 | Vesual Check |
| Smooth appearance and no cracking |
More information of fiberglasstube for Epoxy Fiberglass Reinforced
Pipe For Live Line Tools
Fiberglass insulated hollow tubes have excellent electrical
insulation, heat resistance, and corrosion resistance. They can
effectively isolate and protect wires, cables, or pipelines,
reducing the risk of electrical leakage and mechanical damage. When
using glass fiber insulated hollow pipes, appropriate
specifications and installation methods should be selected
according to specific requirements, and relevant installation
standards and specifications should be followed
FAQ:
1.Is your company a manufacturer or a trader?
* We are the manufacture, 15 years production experience;
* our factory has passed ROSH, SGS, etc;
* Standard: IEC standard;
* Have own quanlity control.
2.Do you have export experience?
* More than 10 years export experience.
*TID products have been exported to Indonesia, Britain, Russia,
Ukraine, Qatar, Romania, UAE, Egypt, USA, Costa rica ,Brazil etc.
3.Delivery time?
*Samples: 3-7 days; order: 30 days or according to the order
quantity.
4.Do you accept OEM/ODM?
* Yes, we have several customer ask OEM/ODM, we'll do what you tell
us!
Choose US, We shall provide you with all-round technical service!
We warmly welcome you to join us!
We are eager to keep permanent cooperation with you!
