(1) Vertical rain drop test device
1. Suitable for product IPX1, IPX2 test.
2. Rain Area: 3000mmX3000mm. (divided into 1000X1000 mm, 9 pieces
of rain drops)
3. Water tank: sealed stainless steel water tank.
4. Drip Needle: ￠0.4mm aperture.
5. Drip needle seat: with hexagonal clamp stainless steel needle
seat, easy to install, needle seat horizontal plane consistent.
6. Hole spacing: 20mm.
7. Rainfall: 1mm+0.5mm /min, 3mm+0.5mm /min, frequency conversion
adjustment automatic control.
8. Drip Height: 200mm (photoelectric beam control).
9. Test Time: 0-9999S can be set.
10. Lifting mode: three-phase motor + T-shaped SUS304 stainless
steel double screw synchronous lifting, safe and reliable.
11. Machine Structure: frame type.
12. Lifting distance: lifting from the ground about 1000-2700mm (or
required)
13. Prevent plugging function: after the experiment, the compressed
air is connected to dry the water in the needle tip of the water
tank to prevent plugging.
14. Tilting rotary table: diameter 3000 mm, load bearing ≥1 ton,
tilt Angle 15 degrees, speed 1~3 RPM can be set.
(2) Smart water supply system
1. Flow control: the use of high-precision turbine flow meter and
electronic digital flow meter intelligent control, each dripper box
independent control, divided into 9 sets of flow meter control, can
be set in the control touch screen flow.
2. Water supply pump: using multi-stage stainless steel centrifugal
pump, divided into 9 pump control.
3. Water supply: 9-way.
4. Body material: industrial alloy aluminum profile.
5. The tap water inlet is equipped with a filter, the filter
element can be replaced.
6. The water tank is equipped with a liquid level switch, which can
automatically replenish water and control the pump to stop the
protection function when the water level is low.
(3) Integrated control cabinet
1. Control: Mitsubishi PLC program control.
2. Operation: 10 inch color touch screen, Chinese and English two
language switch.
3. Control functions: vertical rain lifting action control, stage
action control, test time control, needle blowing cleaning control,
flow control and other functions.
4. Protection function: leakage protection, overload protection,
short circuit protection, water shortage protection.
5. Power supply: AC220V, 50Hz, 15KW.
