Small Tolerance Range Carbon Fiber Sheets And Plates Chemical Resistant

Chemical Resistant Small Tolerance Range Carbon Fiber Sheets and Plates

What is carbon fibre?

Carbon fibre is composed of fibre atoms bonded together with one after the other, in the form of chains. It is due to the strength of these bonds that carbon fibre is quite strong. Along with being strong, carbon fibres are really lightweight. Almost five times lighter than steel, but still five times stronger. Which gives carbon fibres an upper hand.

As it is the most lightweight, yet strong material available in the market today, it is used for a variety of applications, in many different forms. This fibre comes in many different building blocks, such as weaves, yarn, unidirectional, braids, and others, which are used to create composites.

What is a carbon fibre sheet?

The carbon fiber is made up of really thin fibers, which are twisted together to form a yarn. This yarn is, again, woven into a fabric, called the fiber fabric. This fabric is available in a variety of weaves. The lighter carbon sheets have between 3000 to 6000 thin fibers in a yarn. The heavier carbon sheets, however, can have up to 12,000 thin fibers per yarn. Although polyester flakes are also made of carbon, they are made of carbon and plastic polymers. Polycarbonate sheets are mainly used for commercial premises with translucent materials.

Different kinds of fiber sheets have different strengths and properties. The most common kinds of carbon fabric sheets are, harness satin weave, plain weave, unidirectional and twill weave. Before you buy a weave, there are two things you need to keep in mind about them. They are their functionality and appearance.

Every weave has a different look, and people tend to choose the weave with an appearance that suits the nature of their task. Also, the strength of the product also depends upon the kind of weave chosen. If you consider a unidirectional weave, it will be very strong in the direction of the fibers, but weak otherwise. But if you are looking for uniform strength, then plain weaves will be better. So, the point is that the carbon sheets you use depend upon their look and functionality.

Carbon Fiber Sheet Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.