Product Description:
E-link LNK-IPOE-95W Industrial IP67-rated Single-port 802.3bt PoE
Injector provides maximum power up to 95 watts for each! It's been
specifically designed for outdoor powered devices, such as PTZ
network cameras, PTZ speed dome cameras, and multi-channel
(11a/b/g/n) wireless LAN access points that need a higher wattage
for operation. It has an industrial-level IP67-rated aluminum case,
providing a higher immunity against electro-magnetic interference.
Furthermore, the product is dust and water-resistant, and could
work under temperatures ranging from -40 to 80 degrees C.
LNK-IPOE-95W has a 90-264VAC input, and a detection chip for
identifying PoE-standards compliant PDs before supplying power.
Additionally, it could handle data and power transmission over a
cable distance up to 100 meters, making it suitable for working in
complicated, power-sensitive settings. The device is easily
installable, just by using LNK-POT-MBK installation kit, without
requiring any equipment to be opened.
Features:
This product provides support for 10/100/1000Base-TX and is
compliant with the IEEE 802.3af/at/bt regulations. It is able to be
used outdoors and provides power output up to 95W directly. It also
has 4/5(+),7/8(-) and 1/2(+),3/6(-). Not only it provides signal
and PoE output, but also it has lightning protection up to 6KV.
Furthermore, it is designed to work in extreme temperature
conditions ranging from -40℃ to +80℃, and is built with a metal
casing, making it waterproof, dustproof, and an IP67 level of
protection. The sealing gasket has also passed extension, bearing,
corrosion, and aging tests.
Technical Parameters:
| Ethernet |
| Standards: | IEEE 802.3 10BASE-T Ethernet |
| IEEE 802.3u 100BASE-TX Fast Ethernet |
| IEEE 802.3ab 1000BASE-T Gigabit Ethernet |
| Processing Type: | Forward |
| Half-duplex, Full-duplex |
| Forward Filter Rate: | 1,488,000pps (1000Mbps) |
| Cabling: | 10/100/1000Base-T |
| Connector: | 2x M22 Shielded RJ-45 |
| Environmental |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF: | >200,000hrs |
| Input & Output |
| Input Power: | 90~264VAC |
| Output PoE Power: | 55VDC 1750mA |
| Power Pins: | 4/5(+),7/8(-) and 1/2(+),3/6(-) |
| PoE (Power over Ethernet) |
| Standard: | IEEE802.3af/at/bt |
| Port: | M22 Shielded RJ-45 |
| Max. Power per Port: | 95W Max |
| AC Surge Protection |
| Line-Earth 1.2/50us (8/20us): | 6KV |
| Line-Line 1.2/50us (8/20us): | 4KV |
| PoE Surge Protection |
| Protected line: | 1,2,3,4,5,6,7,8 |
| Common mode surge protection(10/700us): | 6KV |
| Differential mode surge protection (10/700us): | 1.5KV |
| Mechanical |
| Dimensions (LxWxH): | 304 x 184 x 75 mm (inner size) |
| Weight: | 3.6Kg |
| Casing: | Aluminum Case |
| Color: | Silver |
| Mounting Options: | Pole-Mount |
Applications:
Support and Services:
PoE Injector Adapter Technical Support and Service
We are committed to providing you with the best technical support
and service for our PoE Injector Adapter product.
Our support team is available to answer any questions you may have,
and to provide guidance and advice on how to get the most out of
your device. We offer both online and telephone support, so no
matter where you are, we can help.
We also have an extensive library of online resources to help you
get started, including FAQs, troubleshooting guides, and
installation instructions. You can also search our online knowledge
base for detailed answers to your questions.
If you need any additional assistance, please don't hesitate to
contact us. We are here to help.
Packing and Shipping:
Packaging and Shipping for PoE Injector Adapter
PoE Injector Adapter is shipped in a cardboard box with the
following:
- One PoE Injector Adapter
- One power cord
- One user manual
The box is then sealed with a plastic wrap and labeled with the
product name and other relevant information.
Ordering Information:
| Model | Description |
| LNK-IPOE-95W | 95W Outdoor Industrial IP67 Waterproof 802.3bt PoE+ Injector |
| Mounting Options | ► Pole-mounted (installation kit needs to be purchased separately) |
| LNK-POT-MBK | Pole-Mount installation kit |
