Making 3d Prints Stronger And Custom 3D Printing Service With
Low-Cost
3D printing service
3D printing for rapid prototyping and production in as fast as 1
day. Get a 3D printing quote with DFM analysis today — no matter
what stage your project is at.Structural integrity in 3D printing
is important as 3D prints must not collapse while functioning. 3D
printing is a popular manufacturing process with wide acceptance
because of the quality it delivers. In terms of improving the
strength of 3D printed parts, there are many things that come to
play.
- 100% visual inspection for every part
- Parts made in the China
- Parts as fast as 24 hours
- ISO 9001:2015 | AS9100D | ITAR Registered
Our 3D Printing Processes
- Direct metal laser sintering (DMLS)
- Stereolithography (SLA)
Metal 3D Printing
Direct metal laser sintering (DMLS)
uses a fiber laser system that draws onto a surface of atomized
metal powder, welding the powder into fully dense metal parts.
Stereolithography (SLA)
Stereolithography (SLA)
uses an ultraviolet laser that draws on the
surface of liquid thermoset resin to create thousands of thin
layers
until final parts are formed.
Stereolithography (SLA)
| Lifecycle | Lead Time | Resolution | Materials |
| Short production runs, Prototyping | 3 days | 0.05 mm | Accura 25, Accura ClearVue, Accura 60, Accura Xtreme Grey or White
200 |
Material Properties
| Tensile Strength | Elongation at Break | Modulus of Elasticity | Flexural Strength |
| 38 MPa (5510 psi) | 16% | 1620 MPa (325ksi) | 57 MPa (8267 psi) |
Design Recommendations
| Max Part Size [x, y, z] | Min Clearance + Gaps for Fit | Min Wall Thickness |
10 x 10 x 10 inches (635 x 736 x 533 mm) | 0.5 mm between parts that need to be assembled 0.2 mm between shells of an interlocking part | 1 mm |
Increase Infill Density
One way of increasing the strength of a 3d print is by increasing
the interior density. The interior density ranges from 0% to 100%, with zero means totally hollow while 100 means
totally solid.
Theoretically, having a 100 infill density should make your 3D
print very strong. However, practically most designers have noticed that anything beyond 70% has a lesser impact on
strengthening the 3D print. Instead, there is a tremendous increase
in filament use, printing time, cost, and burden on the 3D printer.
Increase Wall Thickness
Not only does increasing the wall thickness strengthen the printed
material, but it also improves overhangs
(geometry shapes in 3D models that are difficult to print) and
water tightness.
Shipping way:
Payment method:
Making 3d Prints Stronger And Custom 3D Printing Service With
Low-Cost,JYH is your best partner!
