Parallel Flow Heat Exchanger Micro Channel Condenser AC Aluminum
Fins Fin Width 23.5mm
Product Description:
The design of Insert fin
Heat fin at least single extension and wrapped in flat tube, air
conditioning greenhouse condition or defrosting, condensate / frost
water condensation on the fin, into the lower drainage tank, along
the drain to extend direction, through the delay in the vertical
part of the flat tube, quickly flow to the bottom of the heat
exchanger, solved the parallel flow heat exchanger because of flat
tube, wing water drainage problems, make the product under the
condition of air conditioning greenhouse does not produce water
plugging, eliminate the wind resistance caused by water blocking
and heat bridge between fins. The heat transfer performance of the
heat exchanger is stable, and the thermal curve of the unit is
stable. The single side of the fin is open, forming is difficult,
after many tests, the mold is used to solve the problem, and the
wing shutter, corrugated plate, double shutter, flat plate and
other places to strengthen the wind side heat transfer, to meet the
needs of different working conditions.
Production Process:
Fin stamping →aggregate→header assembly→press forming→degrease
spray (FLUX) drying,
Preheating→(NB) →brazing→ forced air cooling →plastic connection
pipe welding →helium leak detection→ultrasonic cleaning→coating→
drying →sheet metal assembly →final inspection→packaging
Features:
YUNNENG designs and manufactures high-performance microchannel
condenser insert fins displaying a number of advantages over
traditional condenser fin designs, the key of those are:
Conformity and reliability
Fings are very easy to break and deform after stamping and forming,
and the automatic assembly machine(Manufacturing Equipment-Filling
and molding machine) is used to avoid wing deformation and
inconsistent wing spacing.
Frost work condition
With better frosting performance, 30% better than the traditional
microchannel performance.
Passivation + hydrophilic coating
Techical Parameters:
Household heat pump and air-conditioning condenser;
Applications:
Commercial multi-line evaporator, condenser;
Commercial heat pump system (module machine) evaporator;
Bus and car air-conditioning evaporator, condenser;
Commercial air-conditioning duct machine evaporator;
Electric locomotive, rv, truck, engineering vehicle condensers,
evaporator;
New energy vehicle air conditioning condenser, evaporator...
Etc.
