GFS1500 Top Sheet Aligner Corrugated Laminating Machine ,Automatic
Flute Laminator Machine
Performance characteristics:
1. Lead edge feeding system. No feeding pressure structure, doesn’t
damage the corrugated and enhance the pressure resistance of the
corrugated.
2. Adopts top sheet aligner system to ensure high accuracy. Feeding
mode can be chosen overlap sheet or separation sheet type.
3.Digital design realizes automatic adjustment of glue volume.
Automatic adjustment of the gap of the gluing roller (automatically
according to the thickness of the bottom sheet).
4. The design of large stainless steel anilox roller (160mm in
diameter) is stable and high-efficiency, coat evenly and save glue
volume.
5.Automatic detection of top and bottom paper, automatic servo
correction technology. Make the top paper automatically track and
fit the bottom paper, and the accuracy is high.
6. The dual -use lifting platform, we can use the pre-stacker
structure to push the pre -pile of paper into the platform. We can
also push the stack of paper directly into the platform.
7. The multifunctional rack of the bottom paper are suitable for
curved corrugated.
8. Use a circulating glue system to reduce glue loss and stabilize
glue adhesion effect.
9. One -click adjustment of the whole machine (just enter the paper
size).
10. Order memory function, one -click to transfer the previous
order, convenient and fast.
11.Video monitoring.
SPECIFICATION:
| MODEL | GFS-1450 | GFS-1650 | GFS-1900 |
| Max Sheet | 1500*1500mm | 1700*1700mm | 1900*1900mm |
| Min Sheet | 360*380mm | 360*400mm | 500*500mm |
| Top Paper Thickness | 120-800g | 120-800g | 120-800g |
| Max Speed | 180m/min | 180m/min | 180m/min |
| Fitting Precision | ±0.8mm | ±0.8mm | ±0.8mm |
| Machine Power | 22KW | 25KW | 27KW |
| Bottom Paper Thickness | ≤10mm(A-F corrugated board) ≥400g cardboard | ≤10mm(A-F corrugated board) ≥400g cardboard | ≤10mm(A-F corrugated board) ≥400g cardboard |
BRANCH INTRODUCTION:
1. BOTTOM PAPER FEEDING
Lead edge feeding system. No feeding pressure structure doesn’t
damage the corrugated and enhance the pressure resistance of the
corrugated. The wheels use unidirectional bearing (reduce the wear
of rubber wheels). The wide rubber wheels ensure that the E, F, and
G corrugated does not deform. It can also run more than 400gsm of
cardboard or gray board.
2. TOP SHEET FEEDING MECHANISM
Equipped with high speed feeder, and together with Becker vacuum
pump. The front and rear of feeder are controlled by the servo
motor. After input paper size, it will be automatically positioned.
Feeding mode can choose overlap sheet or separation sheet type.
Adopts top sheet aligner system to ensure high accuracy.
3. ELECTRICAL SYSTEM
Mainly using Siemens electric system to ensure machine stability,
high efficiency and low failure. Using man-machine interface and
PLC combination, display all the information on the screen.
Order memory function, one -click to transfer the previous order,
convenient and fast.
4. PRE-STACK PART
Pre-stack pile of paper under the condition of non-stop, improve
efficiency.
The width of the pre-stacker is controlled by the motor, the size
of the paper is automatically positioned. The dual -use lifting
platform, we can use the pre-stacker structure to push the pre
-pile of paper into the platform. We can also push the stack of
paper directly into the platform. And the platform can be adjusted
around the actual situation of the paper stack.
5. POSITIONING SYSTEM & GLUE ROLLER
Equipped with sensors and servo motor, control top sheets to do
independent compensation action to make sure high accuracy. The
design of large stainless steel anilox roller (160mm in diameter)
is stable and high-efficiency, coat evenly and save glue.
Digital design realizes automatic adjustment of glue volume.
Automatic adjustment of the gap of the gluing roller (automatically
according to the thickness of the bottom sheet).
6. AUTOMATIC LUBRICATION SYSTEM
Lubricate the bearing regularly to prolong the service life of the
bearing and save the cost.
Packing:
1. The packing of small machines is confirm to export wooden case
standard, strong and durable. The wooden case's thickness is
generally 1 cm.
2. In order to be waterproof, we usually use bubble film to wrap
machine.
3. We can handle shipping for customers too.
We provide 12 months warranty. During warranty, we provide free
technical support and free normal spare parts for replacing, except
for man-made damage.We can go to your country to debug machine when
you have questions can not resolve,but you must pay 100usd/day to
our engineer.Innovo look forward to long term cooperation with
customers, we will make best service and aftersales service for all
of our customers.
