Similar To JONCRYL FLX 5000 Printing Ink Acrylic Emulsion For Film
Substrate
Introduction
WQ-2217 is deisgned as the counterpart of JONCRYL FLX 5000. WQ-2217
is a self-crosslinking styrene-acrylic emulsion, it has excellent
resolubility and adhesion and is mainly used for water-based film
surface printing inks.
WQ-2217 has excellent properties, such as fast drying, excellent
wet and rub resistance, good resolubility and printability, heat
resistance, blocking resistance, excellent transparency, good rub
resistance. In addition, it can produce a high-gloss transparent film on the various film
substrate.
WQ-2217 acrylic emulsion is specially developed for water-based
gravure printing inks for PE, LDPE, HDPE, OPP, BOPP, PET, etc film
ink, plastic ink. It has good compatibility with the popular
acrylic polymers on the market. Besides, in terms of gravure inks,
it has high-gloss, good pigment wetting ability and transparency.
Physical Property
| Appearance | semi-translucent emulsion |
| Solid content | 45% |
| Viscosity at 25 °C(Brookfield) | 200-1,000 mPa.s |
| pH | 8.5 |
| Acid value (on solids) | 100 |
| Density at 25 °C | 1.05 g/cm³ |
Application
Packaging
200 kg/drum
1000kg/IBC
Special Tips
This material is complied according to our existing technology and
experience, the technical advice provided is sincere, but it is not
guaranteed to be used in all samples and formulations, all the data
are for users reference only.
