KUF2000 series milk flowmeter for liquid flow in pipe
The KUF series milk flowmeter is designed to measure the fluid velocity of liquid within a closed
conduit.
Introduction
KUF2000 series ultrasonic flow meter usually is used in long-term measurement at field. It has three
types of sensor to measure the pipe flow: clamp on type, insertion type and inline pipe type. It can measure heat if contact temperature sensor.
Clamp on type: The sensors clamp on to the outside of pipes and do not come in contact with
the internal liquid. And all the models can become energy meters when connecting to temperature sensors. KUF2000 Series Clamp On Ultrasonic Flowmeter is easy for installation, no need to cut off the pipe and water, no
press loss. It support measuring online long-term. Wide range of
liquid flow can be measured with the sensor clamped on the pipe.
Insertion type: Only two installation holes are needed on the pipe, user can
install the insertion type sensors. By using the hole making tool, the no stop flow installation can be
realized. Sensors contact to the fluid directly, the measurement is
stable and reliable.
Inline pipe type: DN15-32 pipes uses π shape inline pipe sensor, DN40 and above uses
standard inline pipe sensor. The inline sensors has the advantages of low starting flow rate,
high measurement accuracy and no pressure loss.
Parameters
Items | Specifications |
Main unit | Accuracy | Better than ±1% |
Repeatability | Better than 0.2% |
Principle | Transit-time measuring principle |
Measurement Period | 500ms |
Display | LCD with backlight,display accumulated flow/heat, instantaneous
flow/heat, velocity, time etc. |
| Output | Analogue output: 4-20mA or 0-20mA current output. Impedance 0∼1kW.
Accuracy 0.1%. |
OCT output: Frequency signal (1~9999HZ) |
Relay output: over 20 source signal (no signal, reverse flow etc.) |
RS485 serial port |
| Input | Three analogue input |
Three-wire PT100 resistor input (optional) |
Other functions | Automatically record the totaliser data of the last 64 days / 64
months / 5 years; The power-on time and corresponding flow rate of the last 64 power
on and off events. Allow manual or automatic flow loss compensation The instrument working status of the last 64 days |
pipe | material | Steel, stainless steel, cast iron, cement pipe, copper, PVC,
aluminum, FRP etc. Liner is allowed |
Size | 15-6000mm |
Straight pipe section | In the upstream it must be beyond 10D, in the downstream it must be
beyond 5D, in the upstream the length must be beyond 30D from the
access of the pump. (D stands for pipe diameter) |
Liquid | Types | Water, sea water, industrial sewage, acid & alkali liquid, alcohol,
beer, all kinds of oils which can transmit ultrasonic single
uniform liquid |
Temperature | Standard: -30°c - 90°c ,High-temperature:-30°c- 160°c |
Turbidity | Less than 10000ppm, with a little bubble |
| Flow Direction | Bi-directional measuring, net flow/heat measuring |
Environment | Temperature | Main Unit: -30°c - 80°c |
Transducer: -40°C -110°C, Temperature transducer: select on enquiry |
Humidity | Main Unit: 85% RH |
Transducer: water-immersible, water depth less than 3m |
Cable | Twisted Pair Line, standard length of 20m, can be extended to 500m
(not recommended); Contact the manufacturer for longer cable
requirement. RS-485 interface, transmission distance up to 1000m |
Power Supply | DC8~36V or AC85~264V or battery |
Power Consumption | Less than 1.5W |
Protocols | MODBUS, M-BUS, Fuji extended protocol and other factory protocol |
Optional Flow Meter Main Unit
1. KUFS2000A split type wall mount ultrasonic flowmeter
2. KUFS2000B split type panel mount ultrasonic flowmeter
3. KUFP2000 portable type flow meter with built-in printer
4. KUFH2000 handheld type liquid ultrasonic flow meter
5. KUFF2000 integrated type fixed on pipe ultrasonic flow meter
6. KUFM2000 ultrasonic flow thermal module/RTU
Company Information
Xi'an Kacise is certified by ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety
explosion-proof and isolated safety explosion-proof, etc. which
assure our products are conform to the international standards.
We have been specializing in manufacturing pressure, level and flow
measuring instruments and related products for 10 years. We have
experienced technical and management personnel, through the efforts
of our entire staff, we have become a professional measuring
instrument manufacturer and solution provider. And we are
continuously trying to improve product quality.
Currently, Kacise sensor is already exported to America, Spain,
Australia, Chile and 20 other countries and regions, and received
many favorable feedbacks. Our overseas distributers are also
increasing. We regards “reasonable prices, efficient production
time and good after-sales service” as our tenet, and hope to
cooperate with more customers for mutual development.
Our Services
- Your inquiry will be replied in 24hours.
- Well-trained and experienced staffs to answer all your enquires in
fluent English.
- OEM&ODM, we can help you to design and your request will be put
into product.
- Distributorship are offered for your unique design and some our
current models.
- Protection of your sales area, ideas of design and all your private
information.
- Discounts are offered based on order quantities.
- We provide paid repair services for meter damages not arising from
manufacturing quality issues or meter damages not within the scope
of warranty.
products range: Water ultrasonic flow meter price, ultrasonic flow meter, diesel flow meter, water flow meter, liquid flow meter, vegetableoil flow meter
