Self Stick Insulation Support Nail With Self Locking Washer

Noted for Self Stick Insulation Support Nail

1. For the pin diameter, we choosed galvanbized anneaded steel wire and aluminum wire for making pins.

2. stainless steel softly wire for custom orders

3. For the pin length, the length can be meet 300mm.

4. Base size, pin diameter and pin length are customized according to customer requirements.

5. Zinc coated surface treatment for mild steel material

6. Special material can be customized.

installation guides of Self Stick Insulation Support Nail

1. Best results are obtained when ambient temperature is above 40° F at the time of application.
2. Remove the release paper from the base plate and apply hanger to a suitable flat surface.
3. A firm straight, forward pressure should be used. Do not twist.
4. Due to the quick-tack nature of the adhesive, it is very important that the release paper not be removed until ready to apply the hanger.
5. Insulation may be applied immediately after properly securing the hanger.
6. self stick insulation support nail should be stored at 75° F and 50% relative humidity. It is important that stock be rotated. Shelf life is estimated at 2 years if stored as recommended

performance tape of self stick tape

1. Polyethylene foam with aggresive pressure sensitive rubber resin adhesive.
2. Service Temperature : -40 deg C to +70 Deg C
3. Highly Resistant to abrasion, corrosion and moisture.
4. Confirms to European Directive 2000/53 (Lead, Chromium VI, Mercury, Cadmium free)
5. 10 Minutes 180 degree Peel Adhesion : 30 N/25mm
6. 500 Hour static shear ( Stainless Steel) : 0.8 kg/cm3

Specification details of Self Stick Insulation Support Nail

Why choose our HUIHAO insulation fasteners?
1.We choose the best quality materials for making insulation fasteners
2.We do copper plating, zinc coated and phosphating pretreatment for the raw material using drawing machine.
3.We purchase the multi-station cold forging machine to ensure the better mechanical property of shear connector to match the standard(BS EN ISO13918:2008, AWS D1.1, etc.), or as per customer's special requirement.
4.We use the automatic riveting machine to install .
5.After rust prevention, HUIHAO insulation fasteners can suitable for long time ship on the sea.
6.Short delivery time because of our reasonable production flow management

15 YEARS EXPERIENCE
PROFESSIONAL MANUFACTURER OEM/ODM
ONE-STOP CUSTOM FACTORY
MEET YOUR INDIVIDUAL PROCESSING
ENSURE QUALITY AND PRECISION

About HUIHAO

China HUIHAO was established in 2013. We mainly manufacture and supply Wire mesh and insulation fastener. Our corporate headquarter is located in Changan Industrial area Shijiazhuang Hebei, factory is located in Anping Town Hengshui City. Both sites are adjacent to highway intersections, convenient and near to Tianjin ports.

We have been focused on manufacturing, research and development of wire mesh and insulation fastener more than 10 years, HUIHAO is a leading Chinese insulation fastener manufacturer knowing the European and American standards well, supply a full ranges of wire mesh, insulation pins and washers. They are widely used in HVAC, petrochemical industry, equipments insulation, shipyards, wall insulation etc. And moreover, we develop the solar panel mesh clips. In 2020 we expand our business lines of laser cutting and various customized stamping parts, providing one - stop OEM services.

Our main products are Round & Rectangular Lacing Anchor, Self Locking Washer, various of Cup Head Pin (SS Quilting Pin, Cup Head Weld Pin Insulated, Cup Head Weld Pin Without Insulation), Duct Liner Weld Pin, Perforated Base Pin, Self Adhesive Pin, Wire Mesh, various of Solar Panel Mesh Clip (stainless steel, aluminum and nylon)etc. All of our products are produced by own automatic production.

READ MORE

PACKAGING AND TRANSPORTATION

Standard packaging to ensure products arriving at destination in good condition