ASTM BS IEC Standard All Aluminium Alloy Conductor Aster 570
Stranded 1350 aluminum conductors shown in this section of data are
classified as follows:
1. Class AA For bare conductors usually used in overhead lines.
2. Class A For conductors to be covered with weather-resistant
materials and for bare conductors where greater flexibility is
required.
3. Compact strand conductor for use in bare overhead applications
or for use with weather-resistant coverings or insulations is also
available.
4. Classes refer to stranding and are an indication of relative
conductor flexibility, AA being the least flexible, C the most
flexible
Construction
AAAC cable bvconsists of aluminum alloy wires. The aluminum alloy
wires are concentrically stranded.
This section deals with heat-treatable magnesium silicon type
aluminium alloys to the applicable International Standard, the
electrical and mechanical properties of which all fall within the
values suggested by relevant standard.
Conductors to all other recognized specifications can also be
supplied. The alloys referred to have higher strength but lower
conductivity than pure aluminium.
Being lighter, alloy conductors can sometimes be used to advantage
in place of the more conventional ACSR; Having lower breaking loads
than the later, their use becomes particularly favourable when ice
and wind loadings are low.
Product Description
AAAC Cable (All Aluminum Alloy Conductor) referred to have higher
strength but lower conductivity than pure aluminum. Being lighter,
alloy conductors can sometimes be used to advantage in place of the
more conventional ACSR; Having lower breaking loads than the
latter, their use becomes particularly favourable when ice and win
loadings are low.
We can supply this conductor according to different recognized
standards, such as BS EN50182, IEC61089, ASTM B399DIN 48, customer
special specification also can be satisfied.
1. Specifications
Conductor(AAAC) bear conductor meets or exceeds the following ASTM
Specifications:
B-398 Aluminum Alloy 6201-T81 Wire for Electrical Purpose.
B-399 Concentrical-Lay-Stranded 6201-T81 Aluminum Alloy Conductors
2. Product Performance
(1). The electrical performance of AAAC is indicated in DCΩ
/km(20oC). The resistivity of aluminum alloy wire for stranded
wires is: LHA1: not greater than 32.840nΩ . m LHA2: not greater
than 32.530nΩ . m
(2). The rated tensile strength of AAAC is denoted with the result
of total cross-section areas of all aluminum alloy conductors
multiplied by min.
Tensile strength of corresponding size specified in the standard
for aluminum alloy wire.
The technical parameter
| Code Number | Stranding&wire diameter | Approx Overall diameter | Nominal | Approx. | Breaking Load | DC Resistance at 20 |
| area | Weight |
| mm | mm | mm 2 | Kg/km | KN | Ohm/km |
| 16 | 7/1.83 | 5.49 | 18.4 | 50.4 | 5.43 | 1.7896 |
| 25 | 7/2.29 | 6.86 | 28.8 | 78.7 | 8.49 | 1.1453 |
| 40 | 7/2.89 | 8.68 | 46 | 125.9 | 13.58 | 0.7158 |
| 63 | 7/3.63 | 10.9 | 72.5 | 198.3 | 21.39 | 0.4545 |
| 100 | 19/2.78 | 13.9 | 115 | 316.3 | 33.95 | 0.2877 |
| 125 | 19/3.10 | 15.5 | 144 | 395.4 | 42.44 | 0.2302 |
| 160 | 19/3.51 | 17.6 | 184 | 506.1 | 54.32 | 0.1798 |
| 200 | 19/3.93 | 19.6 | 230 | 632.7 | 67.91 | 0.1439 |
| 250 | 19/4.39 | 22 | 288 | 790.8 | 84.88 | 0.1151 |
| 315 | 37/3.53 | 24.7 | 363 | 998.9 | 106.95 | 0.0916 |
| 400 | 37/3.98 | 27.9 | 460 | 1268.4 | 135.81 | 0.0721 |
| 450 | 37/4.22 | 29.6 | 518 | 1426.9 | 152.79 | 0.0641 |
| 500 | 37/4.45 | 31.2 | 575 | 1585.5 | 169.76 | 0.0577 |
| 560 | 61/3.67 | 33 | 645 | 1778.4 | 190.14 | 0.0516 |
| 630 | 61/3.89 | 35 | 725 | 2000.7 | 213.9 | 0.0458 |
| 710 | 61/4.13 | 37.2 | 817 | 2254.8 | 241.07 | 0.0407 |
| 800 | 61/4.38 | 39.5 | 921 | 2540.6 | 271.62 | 0.0361 |
| 900 | 91/3.81 | 41.8 | 1036 | 2861.1 | 305.58 | 0.0321 |
| 1000 | 91/4.01 | 44.1 | 1151 | 3179 | 339.53 | 0.0289 |
| 1120 | 91/4.25 | 46.7 | 1289 | 3560.5 | 380.27 | 0.0258 |
| 1250 | 91/4.49 | 49.4 | 1439 | 3973.7 | 424.41 | 0.0231 |
Luoyang Sanwu Cable Co., Ltd., with registered capital of 100
million RMB, is a high-tech development company for scientific
research, industry producing and trading , offering a diverse
selection of quality wires and cables to industrial customers in 33
countries worldwide. The leading products are ACSR, overhead
conductor, AAAC, AAC, power cable, BLXY, home-used wire and so on.
Sanwu cable owns variously advanced equipment and large quantities
of high skilled professionals. With complete management system,
advanced production process, strict testing procedure and reliable
product quality, we have successively got IS09001,
IS014001,OHSAS18001,TUV Certificate, CCC(China Compulsory
Certification), the national industrial production license and so
on.
In terms of quality, It is highly controlled by our company to
ensure that all the products we sell meet your requirements and
give you reassurance with excellent after-sale service.In terms of
service, we are focusing on your need, we concern what you concern
and request what you request to provide a more satisfied service.
FAQ:
Q: Are you trading company or manufacturer ?
A: We have our own factory and trading company, our factory have
more than 10 years production experience.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. Or it is
15-20 days if the goods are not in stock, and it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance ,balance before shippment.L/C is also available.
Q:Have you ever supplied cables to our country ?
A: Cables have been supplied to many countries across the world
such as USA, Australia, Switzerland, Singapore, Sri Lanka, the
Philippines, Mongolia, UAE, Yemen, Iran, Iraq, Nigeria, Egypt,
Lesotho, Cameroon, etc.
