Inconel 601 Special Alloy UNS N06601 High Performance Alloys For
Strand-Annealing And Radiant Heater Tubes
Product Description
Inconel Alloy 601 (UNS designation N06601) is a
nickel-chromium-iron based solid solution strengthened alloy. It
has good high temperature corrosion resistance, oxidation
resistance, excellent hot and cold processing and welding
properties, and has satisfactory thermal strength and high
plasticity below 700°C. The alloy can be strengthened by cold
working, and can also be connected by resistance welding, solution
welding or brazing. It is suitable for making anti-oxidation parts
that can withstand low loads below 1100°C.
Similar Grade
| GB | UNS | DIN | W-Nr | BS |
| NS1402 | N06601 | NiCr21Mo | 2.4858 | NA16 |
Chemical Composition(%)
| % | Ni | Cr | Fe | C | Mn | Si | P | S | Al | Ti | Mo | Cu |
| Min | 42.0 | 19.5 | Rest | | | | | | 0.1 | 1.9 | 2.5 | 1.5 |
| Max | 46.0 | 22.5 | Rest | 0.03 | 1.0 | 0.5 | 0.03 | 0.03 | 0.5 | 2.4 | 3.5 | 3.0 |
Physical Properties
| Grade | Density | Melting Point | Tensile strength,MPa | Yield strength,MPa | Elongation,% |
| Inconel 601 | 8.08g/cm3 | 1311°C-1366 °C | 1210 | 810 | 24 |
Feature
Outstanding resistance to oxidation at high temperatures;
Good resistance to carburizing conditions;
Good mechanical properties at both room and elevated temperatures
Inconel 601 has good resistance to stress-corrosion cracking and is
specifically recommended for service above 550 C because of higher
creep-rupture properties, resulting from controlled carbon content
and coarse grain size
Specification Standard
| Rod,Bar | Pipe, Tube | Plate, Sheet, Strip | Pipe fittings | Forgings | Wire |
STM B425,B564 ASME SB425, SB564 DIN17752, DIN 17753 | ASTM B163,B423,B775, B626,B751 | ASTM B424 ASTM B906 | ASTM B366 | ASTM B564 ISO 9725,DIN 17754 | DIN 17753 ISO 9724 |
APPLICATIONS
· Trays, baskets and fixtures for heat treatment plant
· Strand-annealing and radiant heater tubes, high-velocity gas
burners, wire mesh belts in industrial furnaces.
· Insulating cans in ammonia reformers and catalyst support grids
in nitric acid production
· Components in exhaust gas systems
· Combustion chambers in solid waste incinerators
· Tube supports and ash-handling components
· Components of waste-gas detoxification systems.
· Oxygen preheaters
