Plate Imaging Setting Platesetter Digital Flexo CTP Machine
EcooGraphix Flexo CTP Machine is used for label, trade mark or package
printing. It can expose the Heat corrosive film, Digital relief printing
plate (water-wash), Digital flexo plate (water-wash), Digital flexo
plate (solvent based), or Thermal PS plate and so on.
Product Description
ECOO Flexo CTP Series Technical Specifications
Model
FL-400
Laser Channel
16CH
Output Speed
1.25 m2/h
Max. Breadth
430mm x 330mm
Laser Power
High power semiconductor laser diode
Plate Type
Digital relief flexo plate(water-wash), Digital flexo
plate(water-wash),
Digital flexo plate(solvent-wash), Steel based digital
plate(water/alcohol washable)
Plate Thickness
0.14mm - 1.7mm
Application
Label and Trademark
Resolutions
4000dpi
Plate Loading
Manual load and unload
Interface
USB2.0
Focus
Adjust Dynamic autofocus
Device Size (WxDxH)mm
1,056 × 830 × 630
Net Weight
280KG
Power
220V/50Hz, 60Hz, Mainframe 0.5KW + Vacuum 1.5KW
Environment
Recommended temperature: 18-30ºC, Humidity: 10%- 80%
| Model | EcooSetter Flexo FL-400 |
| Imaging System | 16-channel |
| Output Speed | 1.25 m²/hour |
| Plate Sizes | Max. 430mm x 330mm |
| Exposing Size | Max.430mm x 330mm |
| Media Type | Heat corrosive film, digital relief printing plate(water-wash),
digital flexo plate(water wash), digital flexo plate
(solvent-based) |
| Plate Thickness | 0.14mm to 1.70mm |
| Resolutions | 4000dpi |
| Repeatablity | ±5μm
(continuous exposing for 4times or above on the same plate with a
temperature of 23ºC and humidity of 60%) |
| Interface | USB 2.0 |
| Plate Loading | Manual load and unload |
| Net Weight | 280kg |
| Machine Size(WxLxH)mm | 830 x 630 x 1056mm |
| Power Supply | 220v/50hz, 60hz, mainframe 0.5kw+vacuum1.5kw |
| Operation Environment | recommended:18-30ºC, Max.18-26ºC, humidity:10-80% |
Features
Easy to use:
After placing plate, the only step you need to do is to press a
button to finish the plate loading within seconds.
Automatic Focusing:
The machine can be used for different thickness plate from 0.15mm
to 1.7mm. Dynamic autofocus system keeps accurate focus constantly
to ensure sharp dot.
Auto balance system of drum takes no more than 5 seconds to adjust
drum balance block to a position, make the drum stable in high
speed rotation.
Auto switch of laser channel:
When any laser channels breaks down, laser channel auto switch
system can continue output through the longest consecutive channel
that remains working to ensure non-stop production.
Linear motor:
More accurate, more simple and more reliable.
Long lifetime and warranty of spare parts:
Laser Lifetime: >10000h
Producing And Packaging
Installation Worldwide
FAQ
1. What are your main products?
Our main products are the Prepress 4up and 8up Online/Offline
Thermal CTP, CTCP, VLF CTP and CTCP, FlexoCTP, Processor, Offset
Plates, inks, blankets, postpress packing equipments and so on.
There are over 3000sets CTPs installed worldwide. Our partners in
USA, Canada, Mexico, Colombia, Turkey, Hungary, South Africa and so
on are very pleased with our technician support service and product
performance.
We also have five offset plates production lines producing the
thermal CTP plate(single and double layers), positive CTCP
plates(single and double layers) and Chemistry free CTP plate.
You can get the prepress equipments and consumables all in one and
no worry about the after-sales service from our company.
2. What is your warranty for the CTPs?
Two years' Laser Head and main spare parts for the CTP, one year
for the processor.
3. What is the Lead Time?
Usually 30-45 days, and we will try our best to meet your demands.
4. Can you also supply the Workflow and RIP?
Yes, we can provide the Workflow Brain New and RIP Compose V9.
5. What about the Installation and after-sales technician support?
Our engineer can go to help the installation and provide the
necessary training. The buyer should take the round air plane
tickets and service charge and the local accommodation cost. Any
problems or questions, we will be at your disposal 7x24 hours.
