Two Component Polyurethane Prepolymer For Shoe Sole Mould Glue

Polyurethane mould glue

Two component Polyurethane Pre-polymer for the shoe mould

Description
This system materials is Bi-component. A is polyol component, and B is MDI-terminated pre-polymers.
Application
This system material is used to produce various Pu mould, such as shoe mould, concrete mould tec. It can substitute silicone rubber to produce “artificial culture stone”.
Characteristic
It has excellent processing properties, cured under room temperature, short demould time, and the color can be changed by adding pigment. The final products are transparent which enjoy good abrasion resistance, water resistance, good resilience. The hardness is in the 40 to 90 shore A hardness range.
Characteristics of components & Physical properties

Mixing and curing
A component ------------------------------------------------------ 100
B component -------------------------------------------------------------------------- as the recommended ratio
Mix temperature (A/B)/ ℃ ----------------------------- 30~60
Mould temperature ℃ --------------------------------------------------------- 30
Gel time (min) ------------------------------------------------------------- as the above data
Postcure, hours/(℃) ----------------------------------------------------- 16 at 100
Storage
Store in a cool and dry place,If you can’t use it up at one time, Pls fill nitrogen gas and then seal it.
Shelf life
The storage time of original packing is 6 month at the above condition from the date of production.
Packing
20kg or 200kg per steel drum
Operation by manual
1．Take certain A component to make reserve.
2. Calculate B component to make reserve.
3. Pour B component to A component and stir evenly.
4. Cast the mixture of step 3 to the mould.
6. Open the mould when the product is hard.
7. Post cure 16 hours at 100℃.
Note: The mixture in the step 3 can be vacuumized to get rid of bubble.
Operation by casting machine
1. Put some A component into A tank, vacuumize to make reserve.
2. Put some B component into B tank, vacuumize to make reserve.
3. Cast the two materials according the ratio to the mould.
4. Open the mould when the product is hard.
5. Post cure 16 hours at 100℃.

Safety

Use in a well ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the skin may cause an allergic reaction.

Eye protection is extremely important. Always use approved safety glasses or goggles when handling this product.

If Contact Occurs:

Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Seek medical attention if allergic reactions occur.

Eyes: Immediately flush with water for at least 15 minutes, contact a physician.

Ingestion: If swallowed, contact a physician immediately. Remove stomach contents by

gastric suction or induce vomiting only as directed by medical personnel.

Never give anything by mouth to an unconscious person.

Note 1

It generally cures to a demouldable state in 30 to 60 minutes; however, thin sections or certain part configurations may require more in-mould cure time. Sections that are less than 3mm may require more before demould. It depends on different products.

Note 2

Both components should be mixed before each use to ensure uniformity of the materials. Opened containers of material should be prevented moisture contamination from humid air.

Disclaimer

The data presented in this leaflet are in accordance with the present state of our knowledge, and does not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control, especially where other companies’ raw material are also being used. Recommendations for use do not constitute a warranty,

Either expressed or implied, of the fitness or suitability of the product for a particular purpose.

Joyway industrial Co.,Ltd. was founded by two great ladies in 2012.

Initially, we made the Polyurethane binder and rubber tiles for the playground and GYM. Because we focused on to provide the environmentally friendly polyurethane raw material for caring the safe and healthy of the children all over the world.

After decades of development and in response to market and customer demands, Joyway Group has expanded its product range and gradually established two specialized production bases focusing on polyurethane resin/ Polyurethane Pre-polymer and Rigid blend Polyols. At the same time, the Group provides partners with upstream and downstream raw materials for polyurethane production. So, currently, the main Polyurethane resin at below.

• Polyurethane Pre-polymer
• Blend Polyols
• Polyether polyols
• TDI (Toluene Diisocyanate)
• Polymeric MDI (Methylene Diphenyl Diisocyanate)
• MOCA (4,4'-Methylene-bis(2-chloroaniline))
• Release agents
• Planetary mixers
• Pu-metal bonding adhesive
• Other additives required for polyurethane products

This comprehensive product portfolio not only meets industry demands but also positions the Group as a key integrated service provider in the polyurethane sector.  

In 2021, in response to the market demand for high-quality polyurethane vibrating screens for mining applications, Joyway Group established a dedicated R&D team. This team focused on multiple aspects, including raw materials, molds, and casting platforms, leveraging its expertise in materials to break international monopolies. The result was the production of Polyurethane fine screens characterized by small aperture mesh sizes, excellent elasticity, long service life, and high cost-effectiveness.

In the same year, Joyway Group Chemical founded its subsidiary, Qinjin Qixing Mining Equipment Co., Ltd., and formed a joint venture with its Indian partners to establish a production base in India. This China-India collaboration aims to broaden perspectives and provide high-quality, durable screening equipment for the mining industry and related sectors.

Additionally, we offer a variety of screening equipment for the mining industry, such as linear screens, banana screens, vibrating screens ect. We are committed to delivering comprehensive screening solutions to our customers!

Currently，Our products are widely used in industries such as mining, coal,aggregates,chemicals and construction.

We have various polyurethane screen panel like Urethane Screen Panel,Polyurethane Tension Screen,Polyurethane Dewatering Screen Panel,Modular Polyurethane Screen,Flip-Flow Screen and TPU wire mesh.

Now, our product range continues to expand upstream and downstream.

In the future.

We have exported products to Europe and other countries in Asia,South America, Africa, Russia etc. Due to our excellent service and professional technical background, we also act as purchasing agent for some customers according to their specific requirements.

No matter how we develop, our concept is always safety, environmental protection and health. Hopefully our story with you will continue forever !