HLN Aquano 10k Coolant heater
HLN Aquano 10kW diesel industrial heater 12V
Features
The HLN Aquano coolant heaters preheat the engines in cold weathers
to reduce engine wear at the starting stage. At the initial engine
starting stage, there is no lubricant on the engine cylinder bore
and pistons. Low temperature causes lubricant to increase in
viscosity, causing it hard to splash lubricant on to the engine
cylinder or pistons. With HLN coolant heaters, the lubricant
becomes warm before the engine starts, making the entire cylinder –
piston system better lubricated and protected at the engine
starting stage. Thus, engine wear reduces significantly and
long-term vehicle maintenance cost also reduced.
Combustion chamber is a key part of the heater that largely decides
the durability of the heater in the long run. HLN selects and
utilizes only the best 301S material to make the heater last under
all kinds of harsh conditions. Every heater user can do a simple
test to judge if the combustion chamber has used good material –
use a piece of magnet to see if it can attach to the combustion
chamber. If so, it means there is too much iron, instead of steel
in the combustion chamber. Therefore, in the long term, heaters
with such combustion chambers are more prone to failures.
This water parking heater uses the diesel as the fuel, heat the
cooling liquid of the engine the forced-circulation water pump
circulation in the cars waterway, prepare the engine and reduces
the attrition achieves the purpose of eliminating the frost and
warming the compartment.
The heater is applied for the engine preheating and in-car heating
of various vehicles, microbuses, light vans, and buses.
Specifications
| Heating capacity, part load/full load (kW) | 4.4/10.3 |
| Fuel consumption, part load/full load (l/h) | 0.51/1.29 |
| Working voltage (V) | 12/24 |
| Power consumption, part load/full load (W) | 74.4/104.4 |
| Weight (kg) | 7 |
| Outline dimensions (L x W x H) (mm) | 435x212x177 |
| Operating ambient temperature (℃) | -41 to +55 |
| Storage temperature (℃) | -55 to +70 |
F&Q:
- Are you a factory of a trading company?
We are a professional manufacture for diesel heater with 40 years
of expertise and experience.
- Can you make products with our brand
Surely, we are welcome to cooperate with OEM service.
- Do you have quality warranty?
Yes, we have quality warranty under normal condition. Please
contact us for details
- Why will you choose us?
Comparing with other manufacturers, the advantages of our Heater
are experience, quality, capacity and price.
Firstly, we have 40 years of experience and expertise to dominate
this field. We are the earliest manufacturer in China.
Secondly, the quality of our heater is the best in China and the
top 3 in the world, and we are the only Chinese heater company in
the OEM equipment supplier field for world's top players such as
FAW Group, Sany Group and Zoomlion.
Thirdly, we produced and sold 200 thousand machines last year as
the No.1 sales volume in China.
Finally, our quality and technology is closed to Webasto and
Eberspacher but the price of our product is much more reasonable,
not only the heater but also the accessories.
