unistrut c-channel with holes, angel channel
C channel with holes
Our products:
1. P41 series are manufactured from hot-rolled low-carbon steel
with galvanized finish or epoxy coating. Wall thickness is 2.5mm,
standard delivery length is 3m or 6m.
2.Wall thickness can be 2.0mm and 1.5mm for light hanging system,
for beam load capacity, use 80% and 60% of appropriate load chart
separately.
3.When P41 series are used as beam, multiply uniformly distributed
load from the table by 0.5 for concentrated load and corresponding
deflection by 0.8.
4. P41 series are also available in stainless steel on special
order.
Usage:
Strut channel is used to mount, brace, support, and connect
lightweight structural loads in building construction. These
include pipes, electrical and data wire, mechanical systems such as
ventilation, air conditioning, and other mechanical systems. Strut
channel is also used for other applications that require a strong
framework, such as workbenches, shelving systems, equipment racks,
etc.Specially made sockets are available to tighten nuts,bolts etc.
inside the channel,normal sockets are unable to fit through the
opening.
Category:
(1) C profile steel
(2) U profile steel
(3) angle profile steel
(4) Channel Combination
