Two-Way Remote Control Signal Jammer/Black Aluminum Case Remote
Control Jammer for 433MHz315MHz
Description:
Two-way remote control signal shield, black housing with two
antennas, one is 433MHz, one is 315MHz, the coverage of this
wireless signal shield can reach 100M because each of the shields
is a point signal, Therefore, this output power is also a
single-to-one signal of 433MHz or 315MHz. The size is small and can
be held in a pocket or in a pocket. The black aluminum case has
good heat dissipation performance. With built-in lithium battery,
it can be used for two hours after charging, or it can be used
while charging.
Parameter:
| Operating voltage | DC9V (built-in rechargeable lithium battery (800mAh)) |
| Operating current | 240mA (dual frequency) |
| Working frequency | 315/433 MHz |
| Coverage radius | 30-100M |
| Dimensions | 210*60*25MM (including antenna) |
| Power adapter | DC9V/1A |
| Colour | Black |
| Material | Aluminum Alloy |
Instructions:
1.Open the package and screw the instrument antenna to the antenna
socket on the back of the instrument. Tighten to prevent abnormal
operation.
2.You need to charge 3-4 hours before you can use it. The factory
power of the product is only about 50%. (Low battery will directly
affect the use of results)
3.Press the side power switch, the blue indicator light, the
monitor emits 315MHz,433MHz wireless signal. That is, press the
side power switch again, the blue indicator will turn off and the
monitor will stop working.
4.Frequency default ANT1 is 315MHz, ANT2 is 433MHz. (from left to
right)
Precautions:
1. Never use a non-dedicated power adapter to plug into the power
input
2. There is danger of electricity in the host, please do not open
the back cover to avoid electric shock and affect the warranty.
3. Turn off the power and unplug the power plug when you are not
using it for a long time or when you are away for a long time.
4. Please use in a suitable shielded environment, so as not to
affect the use of effects.
5. Avoid exposure, rain, water droplets, long-term exposure to high
temperature and humidity.
6. The effective range of the instrument is a circular area
centered on the main unit. Therefore, when using it, be careful to
select the correct position of the instrument to avoid blind
corners.
7. This product is a sensitive instrument for remote control
products. It will shield the remote control signals such as
electric cars, automobiles, remote control doors, access control,
etc. Please use it rationally.
