12V Jump Starter Cable with Battery Clamps Car Jumper Cable for
Emergency Portable Car Jump Start Battery Booster
Replacement Jump Starter Cable:
This Battery jumper cable designed to serve as a jump starter
replacement cable clamp set for most brands of 12V mini portable
jump boxes. Compatible with most car mini jump portable starters,
and mobile chargers to jump-start a dead or weak car battery.
12V Jump Starter Cable with Battery Clamp Specifications:
Wire: 10 AWG, OD 5.5mm, Jacket: Silicone Rubber.
Connector: EC5 Male Plug.
Compatible with most 12V battery booster jumper with EC5 output.
High-Quality:
Strong alligator clamps with tinned copper material cable (better
than pure copper), make sure great-quality and safety protection.
12V Jump Starter Cable with Battery Clamp Eazy to Use:
① - Connect the red battery clamp of the jumper cable to the
vehicle's positive (+) battery and connect the black to the
negative (-) pole;
② - Plug the cord of jumper cable into the jumper starter's socket;
③ - Start the car and remove the clamps.
PAY ATTENTION PLEASE
Do NOT reverse the operation sequence of the jump starter. Please
be careful when using this product, this item can NOT be
overloaded, check your device power before using, please. Do remove
the product from the vehicle within 30 seconds after the vehicle is
started, or it may cause security incidents. Note: Please check
your power bank if it can support your car.
