IEC60335-2-9 Home Appliance Testing Equipment Aluminum Vessel for Drop Test
Vessel For Drop Test procedure:
The vessel uniformly filled with at least 1,3 kg of sand or shot so
that the total mass is 1,80 kg ± 0,01 kg. For induction wok
elements, the vessel is the wok specified in 3.1.9.101. It is
uniformly filled with sand or shot so that the total mass is 1,80
kg ± 0,01 kg.
Products Introduction:
This product is manufactured according to the standard of
IEC60335-2-9 clause 21.101, it is used for the impact strength test
of the electromagnetic stove. It is made of pure aluminum, the
outer ring has a V-lock coil slots, use rope and cloth cover can
prevent the sand spread out when dropping.
This product is practical and simple, it is the special accessories
for dropping test.
Standard of Home Appliance Testing Equipment:
IEC 60335-2-6 Household and similar electrical appliances – Safety
– Part 2-6: Particular requirements for stationary cooking ranges,
hobs, ovens and similar appliances clause 21.102;
IEC60335-2-9 Household and similar electrical appliances – Safety –
Part 2-9: Particular requirements for grills, toasters and similar
portable cooking appliances clause 21.101
Application of Home Appliance Testing Equipment:
This vessel is used to verify the resistance of hob surfaces made
of glass-ceramic or similar materials to the expected stresses in
normal use.
Features of Aluminum Vessel for Drop Test:
The diameter of the vessel is 120 mm ± 10 mm. Made of aluminium.
The edges are rounded at a radius of 10 mm. It has a flat base.
Parameters:
| Item name | Hotplates dropping aluminum plate |
| Material | Aluminum |
| Base flat diameter | 120mm±10mm |
| Edges rounded | R10 |
| Weight | 0.5kg |
| Mass of the sand | More than 1.3g (dropping total weight:1.8±0.01kg) |
| Dropping height | 150mm |
| Dropping times | 10 |
