Benchtop Grating Spectrophotometer TS8510
Introduction:
TS8510 is a benchtop grating spectrophotometer which is developed
by 3nh independently with core technology. It uses a dual-array
CMOS image sensor to have high sensitivity and a wider spectral
response range, which makes the test more accurate. With a
10.5-inch independent rotating screen, it is convenient and easy to
use. The repeatability of ΔE*ab is within 0.015, and
inter-instrument error is within 0.15, and the measurement
performance is super stable and accurate.
Features:
1. International common d/8, SCI/SCE , SCI+SCE Synchronous measurement
TS8510 spectrophotometer adopts D/8(diffused illumination, 8-degree
viewing angle) which is widely applicable in the world, and SCI/SCE
(specular component included/specular component excluded) Synthesis
technology, supporting SCI+SCE simultaneous rapid measurement.
2. Easy to operate with big display Pad, measurement is faster and more accurate
With 10.5-inch independent rotating display pad, make the response
faster, and the operation is more comfortable and convenient.,
3. Double Array CMOS Image Sensor;
It has high sensitivity and wide spectral response range, which can
achieve high -precision and repeatability measurement.
4. Rich measurement index, multiple observation light sources
Support 40+measurement index, D65, A, C, D50, D55, D75, F1, F2, F3,
F4, F5, F6, F7,
F8,F9,F10,F11,F12,CWF,DLF,TL83,TL84,TPL5,U30B,U35,NBF,ID50,ID65,LED-B1,LED-B2,LED-B3,LED-B4,LED-B5,LED-BH1,LED-RGB1,LED-V1,LED-V2,LED-C2,LED-C3,LED-C5,and
other customized light sources.(41 light sources in total, parts
will be achieve via software in PC),multiple observation light
sources, meet different measuring requirement.
5. Automatic measuring aperture distinguish
Freely switchable between 4 measuring apertures:
φ25.4mm/15mm/8mm/4mm. Users also can customize apertures.
6. Convenient measurement, widely application
Side measurement, upward measurement, and downward measurement
(using accessories) and other gestures are placed and measured,
open -type transmitted warehouses, adapting to more samples.
7. Automatic temperature and humidity compensation function, make the
measurement data more accurate
8. The camera located, clearly confirm the measured area
TS8510 has a built -in camera to set the location positioning.
Through the real -time scene of the camera, it can accurately
determine whether the measured part of the object is the target
center, which improves the measurement efficiency and accuracy.
9. Adopt combination full spectrum LED light source and UV light
source
Wavelength range 360nm-780nm, combined LED Light. Including UV,
400nm cut-off light source, 420nm Cut-off light source, 460nm
Cut-off light source
10. Color management software
With SQCX quality management software, TS8510 spectrophotometer is
suitable for quality monitoring and color data management in
various industries. Data the user's color management, compare color
differences, generate test reports, provide multiple color space
measurement data, and customize the customer's color management.
TS8510 Benchtop Grating Spectrophotometer Specification:
| Model | TS8510 (LED Light source) |
| Optical Geometry | Reflect: D/8 (diffused illumination, 8-degree viewing angle) ; |
| SCI (specular component included)/SCE (specular component excluded)
; Include UV / excluded UV light source ; |
| Transmittance: D/0 (diffuse illumination: 0° viewing) ; |
| SCI (specular component included)/SCE (specular component excluded)
; Include UV / excluded UV light source ; |
| HAZE (ASTM D1003); |
| Standards meet: CIE No.15, GB/T 3978,GB 2893,GB/T 18833, ISO7724/1,
ASTM E1164,DIN5033 Teil7,JIS Z8722 under condition C |
| Characteristic | 1. Widely applied in paints, inks, textiles, garments, printing and
dyeing, printing etc industries for color transfer and quality
control. |
| 2. 10.5 inch rotatable display pad,128G storage,camera locating |
| 3. Instrument can be measured on the side, upward measurement, and
the downward measurement (use accessories) and other gestures. |
| 4. Open transmission warehouse, available thickness of 54mm
transmitted samples. |
| 5. Automatic temperature and humidity compensation function. |
| Integrating Sphere Size | Φ154mm |
| Light Source Device | 360nm–780nm Wavelength range, combined LED Light. Including UV,
400nm cut-off light source, 420nm Cut-off light source, 460nm
Cut-off light source |
| Spectrophotometric Mode | Concave Grating |
| Sensor | 256 Image Element Double Array CMOS Image Sensor |
| Wavelength Range | 360~780nm |
| Wavelength Interval | 10nm |
| Semiband Width | 5nm |
| Measured Reflectance Range | 0~200% |
| Reflectivity Resolution | 0.01 |
| Measuring Aperture | Reflective: |
XLAV Φ25.4mm/Φ30mm, LAVΦ15mm/Φ18mm , MAVΦ8mm/Φ10mm, SAVΦ4mm/Φ6mm |
| Transmissive: |
| Φ25.4mm(No limit on sample height and width, but thickness≤54mm) |
| Remark: |
| 1. Automatic identification of aperture switch |
| 2. Customized Configuration caliber and lens position |
| Specular Component | Reflectance: SCI&SCE / Transmittance: SCI&SCE |
| Color Space | CIE LAB,XYZ,Yxy,LCh,CIE LUV,Musell,s-RGB,HunterLab,βxy,DIN Lab99 |
| Color Difference Formula | ΔE*ab,ΔE*uv,ΔE*94,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*00, DINΔE99,
ΔE(Hunter), ΔE*CH, 555 Index |
| Other Colorimetric Index | WI(ASTM E313,CIE/ISO,AATCC,Hunter,Taube,Berger Stensby) |
| YI(ASTM D1925,ASTM 313),ISO brightness,R457 |
| MI (Metamerism Index), |
| Staining Fastness, Color Fastness, Color Strength, Opacity, |
| APHA/Hazen/Pt-Co Index,Gardner Index |
| Haze, Transmission(ASTM D1003), Saybolt index, ASTM D1500 Color
code, 8° Gloss, 555 Index, carbon(My,dM),Color density
CMYK(A,T,E,M), Tint, Color density(part function achieved via
software in PC) |
| Observer Angle | 2°/10° |
| Illuminant | D65,A,C,D50,D55,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,CWF,DLF,TL83,TL84,TPL5,U30,B,U35,NBF |
| ID50,ID65,LED-B1,LED-B2,LED-B3,LED-B4,LED-B5,LED-BH1,LED-RGB1,LED-V1,LED-V2,LED-C2,LED-C3,LED-C5,
customized light source(41 light sources in total,part achieved via
software in PC) |
| Displayed Data | Spectrogram/Values, Samples Chromaticity Values, Color Difference
Values/Graph, PASS/FAIL Result, Color Offset, Color assessment,
haze, liquid chromaticity |
| Measuring Time | 2.0s(Measure SCI & SCE meantime about 4s ) |
| Repeatability | Reflectance chromaticity value:Φ25.4mm/SCI, Standard deviation
within ΔE*ab 0.015 ( When a white calibration plate is measured 30
times at 5 second intervals after white calibration); |
| spectrum reflectance /transmission:≤0.1% |
| Inter-instrument Error | Φ25.4mm/SCI, Within ΔE*ab 0.15 (Average for 12 BCRA Series II color tiles) |
| Dimension | L*W*H=440x248x283mm |
| Weight | Approx. 13.5kg |
| Power | AC 24V, 3A Power adapter power supply |
| Illuminant Life Span | 5 years, more than 3 million times measurements |
| Display | 10.5-inch rotatable Display Pad |
| Data Port | USB & Bluetooth 5.0 |
| Data Storage | 128G storage, above 100000pcs |
| Language | Simplified Chinese, Traditional Chinese, English,(Optional
Customized German,Russian, French ,Spanish ,Japanese, Thai, Korean,
Polish, Portuguese) |
| Operating Environment | 0~40℃(32~104°F) |
| Storage Environment | -20~50℃(-4~122°F) |
| Standard Accessory | Power Adapter, User Guide, U Disk(PC Software), USB cable, Standard
Calibration Board, Black Calibration Cavity, Transmission black
baffle, Sample holder, 25.4 caliber, 15 caliber, 8 caliber, 4
caliber,Transmissive Test Component, cuvette, 10.5-inch screen |
| Optional Accessory | Micro Aperture(4mm) transmission test clamp component, Instrument
inversion components,culture dish,Film fixture |
| Notes | Test reports can be printed through a network printer connected to
a PC or display pad, The specifications are subject to change without notice. |
