Start to work
1) Startup: Press the Power button after the product is fully
charged to start the machine, and press this button again to shut
down the machine;
2) Mode switching: Press the mode key to activate the AUTO (auto)
mode by default after startup. Press the Mode key to switch to the
MAX (powerful) mode. The two modes
alternate in turn;
>> AUTO (auto) mode: The cleaning power is automatically
adjusted according to the degree of fouling on the ground, and this
mode is suitable for daily floor cleaning and
maintenance at home;
>> MAX (powerful) mode: This function can be used for
stubborn stains or those that cannot be removed easily or quickly
from the floor;
>> Dry suction mode: With no water supplied from the water
pump, conduct the dry suction/mop cleaning on the floor, suitable
for removal of massive water strain and dry
mopping;
3) Sterilization with electrolyzed water: After removal of the host
from the charging base, press the electrolyzed water/self-cleaning
multi-function button to activate the
electrolyzed water sterilization function, and press this button
again to deactivate this function;
4) Self-cleaning: When the host is charging on the charging base,
press the electrolyzed water/self-cleaning multi-function button to
activate the self-cleaning function of the
machine. Deactivate this self-cleaning function by pressing this
button again;
5) Voice on/off: The voice broadcast function is activated by
default, and the voice function will be deactivated if the voice
switch is pressed.
